2100158-1-S-Whirlpool-99002827-Electronic Control Board - LED
2100158-1-S-Whirlpool-99002827-Electronic Control Board - LED 2100158-2-S-Whirlpool-99002827-Electronic Control Board - LED

Electronic Control Board - LED

PartSelect Number PS2100158

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Compare At

    $320.52
  • You Save

    $53.42
  • Your Price

    $267.10
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 5 reviews What's this?
1-5 of 5
 

14 of 14 people found this instruction helpful

Parts Used

  • Electronic Control Board - LED

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerMark from Liberty MO

The main control assembly board was burnt. When I pressed on any of the buttons, the timer would turn on for a few seconds and then fade away.

I had to remove the 8 screws around the interior portion of the door using a star driver. Once those screws were removed, the front door separated quite easily. I lifted the inside portion of the door to the "closed" position and used a small screw driver to hold it in place. I then removed the 3 screws using a nutdriver to remove the control assembly. I did remove the assembly without detaching any of the electrical connections. Then, place the new assembly in place (but not screwing it in yet), I moved the electrical connections one at a time. After that, I secured the control assembly, and reassembled the door panel. Everything went very smoothly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

  • Electronic Control Board - LED

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

Customerrichard from parma heights OH

Electronic control board fryed

removed old one left wires attached until i took them off and replaced with new board one at a time. repair was easy. repair company wanted 300.00 to do what i did for the cost of part 149.00. it took more time to remove the screws in the door then it did to install the control board.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Electronic Control Board - LED

Level of DifficultyEasy

Time to do repair:30 - 60 mins

Tools

CustomerALBERT H from SHREWSBURY MA

Would not drain.

Removed the inside door cover. Removed the printed circuit boards. Put in the new boards. Replaced the inside door cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Electronic Control Board - LED

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customerdavid from simsboro LA

Dishwasher wouldn't complete cycles

First I removed the screws that held the door together. I then unplugged all the wires from the back and removed the screws holding the LED panel in and unsnapped it from the clips. Just reverse the process putting the new one in. Worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerBrian from Estes Park CO

The hardest part was getting the old board out without breaking it

I unscrewed the 8 star head screws on the inner door panel and the 2 screws on the outer edge of the door, then the 2 screws on the door handle and it all opened up to the control board. Next I unscrewed the 2 screws holding the board and removed it, then disconnected the wire plugs to replace the board. At this point it was just a matter of reversing the sequence events.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 5