2100114-1-M-Whirlpool-99002780-Lower-Wheel-Assembly.jpg
2100114-1-S-Whirlpool-99002780-Lower-Wheel-Assembly.jpg 2100114-2-S-Whirlpool-99002780-Lower-Wheel-Assembly.jpg 2100114-3-S-Whirlpool-99002780-Lower-Wheel-Assembly.jpg

Lower Wheel Assembly

PartSelect Number PS2100114

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Unusual Noise.
  • Compare At

    $4.45
  • You Save

    $.74
  • Your Price

    $3.71
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 28 reviews What's this?
1-15 of 28
 

466 of 466 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerWalter from Tucson AZ

Broken latch handle

The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is disconect the power from the dishwasher (unless you like to live dangerously like me) take your drill with the correct size torx bit and remove all the screws on the inside door pannel (the top center two screws actually hold the latch assembly in place). Disconect the 4 wires from the old part and reconect them to the new part and reinstall all the torx screws being careful not to strip the plastic threads that they screw into if you are using a drill. Whole process takes less than 5 minutes. I am surprised that Maytag used such a flimsy handle assembly in their dishwashers since they are supposed to have the repair men with the most time on their hands. They probably sell just as many handle assemblies as they do dishwashers that have this particular part in it, probably more since you will probably have to change it 2 or 3 times during the life of the unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

365 of 369 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerPenny from Perry UT

Clips to hold the folding tines on the bottom rack were broken; also replaced some wheels on same rack.

It took awhile to figure out how to install the peg clips; I still have my manual, but there is no diagram or picture to show how they are installed (and not on the internet either - not even Amana's site), but I figured it out... so here are the instructions I have created.

On the rear part of the lower rack, you will notice that there is a row of larger spaces between the bars; we are only concerned with the 3 farthest right spaces & the 6 bars that create them.

Install both clips with the ‘flange’ that wraps around the bar inside the square; this will position the clamps that hold the clip in place on the outside edge of the bar.

Place one clip on the far right bottom bar; place another clip on the left hand side of the 3rd space (4th bar from the bar the other clip was attached to on the right).

There are small ‘legs’ that protrude from the folding tines on one end of each; place the tines so that the 2 large tines on both are on the outside, the 4 straight tines are on the inside of the squares when they are folded down, which will put the little ‘legs’ down by the far left square.

Snap the tines into the small clamps on the ends of the clips, so that the loops on the ends will rotate up into the larger clamps when the straight tines are folded down, which will hold them in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

362 of 364 people found this instruction helpful

Parts Used

  • Lower Wheel Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerjeanne from waynesboro TN

2 broken wheels on basket

unwrapped wheels ,pulled out drawer and easily put on new wheels...as we live way out in the boonies it was great to be able to order parts and have them delivered so fast...easy to fix....

Help other customers find the most helpful instructions.

Were these instructions helpful?

208 of 409 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Socket set

CustomerCHRISTOPHER from Spalding NE

Wash quality was getting bad

THE UPPER ARM WAS HELD IN BY A TORX SCREW. THE SHOULDER ON THE SCREW HELD THE ARM IN PLACE. ONCE REMOVED I SIMPLY SWAPPED PARTS AND INSTALLED SCREW. THE LOWER ARM WAS HELD ON BY A PLASTIC NUT WITH KNURLED EDGES THAT YOU CAN REMOVE BY HAND. THE ARM SIMPLY LIFTED OFF AND I SWAPPED ARMS AGAIN. THE ROLLERS ARE HELD ON BY A CURLED PLASTIC LOCK THAT GRIPS THE WIRE BASKET.

Help other customers find the most helpful instructions.

Were these instructions helpful?

113 of 178 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

ToolsScrew drivers, Wrench(Adjustable)

CustomerJoseph from Merrill WI

Didn't spray water.

Inside the Dishwasher on the bottom of unit, I removed the dish cart. The removed the sprayer arm with an adjustable wrench on the plastic nut on the center top. Then removed the top three screws with a Torx 20 screw driver and removed the plastic cover, then removed the single screw above the black plastic water pump piece and took it off. Then removed the six additional screws that were then displated after the previous cover was exposed. Finally I unscrewed the ivory colored plastic shaft which holds the food processor blade from the metal motor shaft with a adjustable wrench. Upon inspecting the ivory plastic shaft I noticed that the threads were stripped inside it. Which means it didn't turn when the motor would turn and wouldn't drive the water pump.

I ordered the replacements and noticed that the replacement for the plastic ivory colored shaft was a metal shaft. It had new pieces as the food processor blade had notiches in new places. The kid had all the replacement parts and a good set of instructions for what to replace and where it would go.

Then I assembled the washer as I had taken it apart. And it worked perfectly the first time. It has been repaired and working for a few weeks now without incident.

Help other customers find the most helpful instructions.

Were these instructions helpful?

130 of 254 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGina from West Alexandria OH

Wheel had broken off along with the folding tines' clip

All I had to do was to snap the parts into place. I also had someone come here to find a leak in my dishwasher. It was in the latch and seal that kept the soap dispenser closed. They wanted to charge me over $50 when the part only cost less than $9 with shipping. I just ordered it and installed it myself. Piece of cake!

Help other customers find the most helpful instructions.

Were these instructions helpful?

127 of 250 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLiz from Alexandria VA

Dishwasher lower basket suffered from wear and tear

Slipped into place the two wheels on lower basket that had gone missing; removed brackets for adjustable section that were broken and easily snapped knew ones into place; connected handle to flatware basket and replaced the old one. Why we didn't do this years ago!

Help other customers find the most helpful instructions.

Were these instructions helpful?

65 of 65 people found this instruction helpful

Parts Used

  • Lower Wheel Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMary J. from Westwood MA

Broken wheels

SNAPPED ON NEW WHEELS

Help other customers find the most helpful instructions.

Were these instructions helpful?

66 of 128 people found this instruction helpful

Parts Used

  • Lower Wheel Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from sleepy hollow NY

Plastic wheel fell off and melted

Stuck new wheel on, time to find and order part on partselect 2 min, time to open package and install part 1 min.

Total job 3min.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lower Wheel Assembly

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerMichael from Denver CO

Lower basket wheels fell off and were melted

Orderd the part's from your web site (recived my order in a timley fasion thanks) the parts just sliped on and clipped' basket rolls great. Mike Schaffer

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDebbie from Crockett CA

One of the wheels was missing from the lower rack and a rack stopper was also missing from the the top rack.

A really easy and simple repair that required no tools. The parts were delivered within a matter of days. Completely satisfied with transaction and results.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lower Wheel Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLaura from Darien IL

Lower diswasher tray missing 3 wheels

All I had to do was litterally snap the wheels into place..it was so easy and so cheap!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLloyd from Franklin IN

Dishes would not come out clean.

Pretty much just snapped things into place. The new spray arms solved the problem. The old ones were clogged, and there's no way to clean them from the inside (dumb design, in my opinion). Happy times!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMatthew from Beaufort SC

Broken dw latch

Removed screws. New Part does not come as an assy. Need to order handle. Other sights offer full assy for less.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lower Wheel Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerPaula from Bloomington IL

Broken wheels on dishwasher racks

The plastic wheels on the upper and lower racks keep breaking. The latest casualty was also chewed up by the dog(s). They just pop right on the posts, a simple 2-second fix. I ordered the parts on a Tuesday morning, standard shipping, and they arrived FedEx less than 24 hours later. They came from Peoria, and I live about 1 hour away in Bloomington. Very pleased with the service. Will order from PartsSelect again if I need parts for any other appliance that I can fix myself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 28