This lower dishrack roller is less than two inches in diameter. It is made entirely of white plastic. If you find that your dishwasher is making loud noises or the lower rack is getting stuck when you are moving it in or out, it could be that the lower wheel assembly needs to be replaced. The dishrack wheels allow for easy movement of the dishrack in and out of the dishwasher. These rollers tend to wear down at the same speed, so it is recommended to replace both pairs at the same time. Open your dishwasher and remove the bottom rack, locate the locking tab, and rotate until it easily slides out of place. Slide the new wheel over the shaft and locate the locking tab to snap back into place.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Dishwasher Lower Wheel Assembly
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Noisy
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Amana, Jenn-Air, Admiral.
Part# WP99002780 replaces these:
AP6014478, 9-3095, 903095, 99002780
Customer Reviews
Average Rating:
★★★★★
★★★★★
19 Reviews
4.4
Filter By Rating:
5 Stars
14
4 Stars
1
3 Stars
3
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Rosemary M - July 27, 2023
Verified Purchase
Replacement wheel
Perfect part Just like the original
★★★★★
★★★★★
Joanne G - August 4, 2021
Verified Purchase
very easy repair
My part came very quickly and in perfect condition. The installation was seamless and simple AND works perfectly!
★★★★★
★★★★★
Tom C - June 10, 2020
Verified Purchase
easy
easy to replace
★★★★★
★★★★★
Sheila V - March 28, 2020
Verified Purchase
Easy installation of replacement wheel for lower rack
Super easy to install, in less than a minute the, my lower dishwasher rack rolls as good as new!
★★★★★
★★★★★
WILLIAM C - December 27, 2019
Verified Purchase
Fixed in 1...2...3!
Very simple install. Thank you!
★★★★★
★★★★★
RONALD L - October 28, 2019
Verified Purchase
Perfect Part
Easy install
★★★★★
★★★★★
Phillip O - August 17, 2019
Verified Purchase
Simple wheel - outrageous shipping cost
This tiny wheel, so small and so light but so necessary. The part works exactly as expected. But the shipping cost for this tiny little piece was absolutely outrageous. There was no special shipping, no box, not even a padded shipping bag just a thin plastic bag! How on earth can they justify such an inflated cost.
★★★★★
★★★★★
Steven L - June 11, 2019
Verified Purchase
It was the right parts
Came faster Than thought it would
★★★★★
★★★★★
Paul P - May 27, 2019
Verified Purchase
Worked fine
Part in good condition. Arrived quickly
★★★★★
★★★★★
Luther H - December 11, 2018
Verified Purchase
Very easy repair
Worked great
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 28 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The dishwasher handle was broken. This has happened before, a few years ago. It was over 150.00 to fix
This was incredibly easy. First of all the part came in just a few days and I could have had it earlier if I wanted expedited shipping. I turned off the main power to the dishwasher from the fuse box. I used a screwdriver to take the screws out of the door, unplugged the handle (literally one piece) and plugged the new one in, replaced t
... Read morehe screws in the door and DONE! The part was 50.00 and I saved 100.00 in labor. If I can do this anyone can. They have a nice tutorial on you tube as well.
This was the easiest repair I have ever done! Ordered in a few mins, and received the very next day. Opened the box and installed the two wheels - Done. That was Easy! Thank you so much for such quick service! Most definitely will use your company again in the future.
Barbara from Westbury, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower basket wheels fell off and were melted
Orderd the part's from your web site (recived my order in a timley fasion thanks) the parts just sliped on and clipped' basket rolls great. Mike Schaffer
Michael from Denver, CO
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Racks fall off when pulled out too fast.
Clipped the new rail stop on where an old one fell off. Removed the old wheels with broken clips and clipped the new ones. Took less than 5 minutes from USPS delivery to completed job.
There were two wheels missing from the lower dish rack.
I watched the video repair program and it was just that simple. What was the most amazing is from the time we called in the order until we got the parts and made the installation was less than 72 hours. We simply cannot believe how easy this was. Thanks ever so much!!!!
Edward from Damascus, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
had to replace four bottom rack wheels
I'm so happy I ordered these wheels, with them it's running like new. Without the wheels it was making grinding sounds when it ran. You just push them onto the rack spokes and snap them in place. EASY!
Janice from Katonah, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheels had broken on the bottom rack
Popped the wheels on just like the ones that were still there and it was good to roll. Nice!
Jo from Olympia, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Adam
November 19, 2018
How many wheels are there in the model?
For model number mdb7100awq
Hello Adam, Thank you for the question. As Per Whirlpool, this substituted part only has 6 wheels instead of 8. If you have the Original rack, you will need 8 wheels. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Adam
November 19, 2018
The rack part in which the wheel pushed into is rusted and broken.Is there a new replacement "wheel assembly" will fit in the existing rack(lower)?
For model number MDB7100AWQ
Hello Adam, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11746834, but if the rack is rusted and broken it will need to be replaced. Part Number: PS1960964. Thank you for your inquiry, good luck with this repair!
Does this come with both set of wheels for the bottom rack? front and back?
For model number MDB8750AWS
Hello AJ, Thank you for the question. This is one individual Wheel Assembly. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joseph
November 22, 2022
Does the lower rack wheel need to be purchased in pairs
For model number MDB8951BWS
Hello Joseph, thank you for your question. It does not need to be but it is recommended. These rollers tend to wear down at the same speed, so it is recommended to replace both pairs at the same time. Thank you and have a great day
1 person found this helpful.
Was this helpful?
Thank you for voting!
Garnell
February 11, 2018
Left door spring attachment with 16 inch broken cable. How do I install them. You don't show the cable on the diagram. Is it available?
For model number JDB6510AWP
Hi Garnell, Thank you for the question. The Door spring is PartSelect Number PS11746856 and the cable is PartSelect Number PS11747654. Please see the video link below for the spring. We do not have a video for the cable but here are some steps. Attach cable to the hinge. Then attach cable to cable link. Route under the roller. Attach to the short hook of the spring. Place large hook of spring into spring adjustment. Hope this helps!
https://www.youtube.com/watch?v=YPF4ckYRZRc
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
