| |
19 of 22 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerVictor from Cary NC
The plastic bits in the dishwasher's drawers eventually break incl the bottom "mesh" of the flatware basket
These parts snap in and out by hand, except the flatware basket of course. After getting the new parts I will mention two things: 1) the two halves of the flatware basket are symmetrical; i.e., you can use two of either basket PN as long as you don't care about how the basket is divided (one side has two sections and the other has three); 2) the replacement parts seem to be made of stronger/more flexible plastic (either the material degrades over time from the heat and detergent, or maytag had enough early product life warranty claims on the pastic bits that they improved the material).
|
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerChristopher from Upton MA
My dog got into the kitchen by going over the dishwasher (100 lb lab), and bent the rack tracks and broke one of the track wheels. My family wanted a new dishwasher. Whereas I am cheap.
A simple remove and replace was all it took. Remove the little latches on the end of the tracks, Slide the track out, take the broken wheels off-they snap off. Snap new wheels on rack. Slide new track in threading it through the stationary wheels attached to the wall of the unit, and through the wheels of the rack. Snap the end-caps back on. Good as new. Also replaced a fold away tine that had the plastic worn off it (=rusted). These snap out and new one in very easily.
|
3 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerCarole from Noblesville IN
Folding dishracks had broken latches to hold them in place making it impossible to properly "stack" my dishes. I actually called this the dishwasher from hell until I found partselect and was able to get the parts needed to fix those darne d folding racks. Now it's like a new dishwasher.
Simple removed the paperclip I put in place last summer to hold the rack in place, snapped both new parts where they belonged, and WOW, it's like new. So easy. And the best part was that I had the replacement parts in less than 24 hours! Talk about fast service.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerAnn from Dayton MD
The door latch assembly broke.
Turned off power to the dishwasher. Removed eleven screws to the inside door panel. Disconnected two wire harness connectors from the broken door latch assembly, and replaced them onto the new door latch assembly. Replaced the door panel and inserted the eleven screws. Turned power back on. Dishwasher works fine now.
|
1 of 10 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
CustomerDIhan from Irving TX
Dishwasher was not washing properly
now the dishes come out clean.
|