| |
19 of 22 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerVictor from Cary NC
The plastic bits in the dishwasher's drawers eventually break incl the bottom "mesh" of the flatware basket
These parts snap in and out by hand, except the flatware basket of course. After getting the new parts I will mention two things: 1) the two halves of the flatware basket are symmetrical; i.e., you can use two of either basket PN as long as you don't care about how the basket is divided (one side has two sections and the other has three); 2) the replacement parts seem to be made of stronger/more flexible plastic (either the material degrades over time from the heat and detergent, or maytag had enough early product life warranty claims on the pastic bits that they improved the material).
|
4 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerJames from Crestview FL
Fold-away tine latch broken
I ordered both types of fold-away latches that were listed on the parts brakedown for the model dishwasher.Neither one of the latches were the correct ones for my dishwasher.I ended up tying the tines in with plastic ties.My dishwasher is a Maytag model # MDB8600AWW serial # 25394469ET.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Wrench(Adjustable)
CustomerTim from Saginaw MI
Water not draining & dirty dishes
Looked on line for replacement parts and found this website along with drawings, videos and owners who had the same problems and followed their descriptions on how to fix the different items I had to deal with.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerPAM from GRAPELAND TX
Plastic parts broken
Everything just snapped in to place.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerAnn from Dayton MD
The door latch assembly broke.
Turned off power to the dishwasher. Removed eleven screws to the inside door panel. Disconnected two wire harness connectors from the broken door latch assembly, and replaced them onto the new door latch assembly. Replaced the door panel and inserted the eleven screws. Turned power back on. Dishwasher works fine now.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJoan from Baldwin NY
Lower level was missing screw and was also missing parts to help dishes stay up
Screwed new screw onto arm of lower rack
Snapped tine pivots into place
|