| |
9 of 11 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Tools
CustomerELAINE from COOS BAY OR
The clips holding folding parts of the dishwasher rack had broken, so I ordered replacement clips.
I snapped the new parts onto the old parts of the dish rack. Voila! All done.
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Tools
CustomerMike from Brooklyn Park MN
2 broken plastic dishrack tine pivots. Middle rack rusted rod.
Removed and replaced middle rack. Installed new upgraded roller clip on wheels. Installed new plastic dishrack tine pivots being careful not to break them.
|
3 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerCarole from Noblesville IN
Folding dishracks had broken latches to hold them in place making it impossible to properly "stack" my dishes. I actually called this the dishwasher from hell until I found partselect and was able to get the parts needed to fix those darne d folding racks. Now it's like a new dishwasher.
Simple removed the paperclip I put in place last summer to hold the rack in place, snapped both new parts where they belonged, and WOW, it's like new. So easy. And the best part was that I had the replacement parts in less than 24 hours! Talk about fast service.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerDonna from Grapevine TX
One rack adjuster failed and the tine piviots wore out due to age.
I had changed a rack adjuster several years ago but decided to take a look at your videos before starting the repair. I watched both videos and then did exactly as suggested. The repair went very quickly and was extremely easy.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Wrench(Adjustable)
CustomerTim from Saginaw MI
Water not draining & dirty dishes
Looked on line for replacement parts and found this website along with drawings, videos and owners who had the same problems and followed their descriptions on how to fix the different items I had to deal with.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerJay from Arlington WA
One of the dish rack tines broke when I forced a large platter into the rack
It took a few minutes for me to reallize that I needed to look at the way/direction the tine clip was in the existing position. It is important to mesh the part into all the correct positons before trying to complete the repair into the final snap/placement of the tine/clip. A minute or two of looking and (really important) not trying to replace both front AND rear tines at the same time! They are mirror images of each other. If you change one at a time, you can use the other as a template!
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJeffrey from Mill Valley CA
The dishrack tines were falling over and not holding the plates.
It only took a couple of seconds to snap in the replacement dishrack tine pivot parts. I didn't know how easy it was to get replacement parts and lived with the problem for months. The parts were easy to figure out on the website and arrived in a couple of days. Problem solved.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerZack from Suwanee GA
Broken dishrack tine
I snapped the old broken one off and snapped the new on.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerPAM from GRAPELAND TX
Plastic parts broken
Everything just snapped in to place.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerGwen from Oconomowoc WI
Broken tine pivot
pulled broken piece off and snapped new one on.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerPaul from Sandy Springs GA
Dishrack tine pivot broke when adjusting
This repair did not require tools, but the positioning of the rack supports that the tine pivot holds in place did need to be positioned such that the tine pivot held the supports correctly in place without wiggling. The easiest way to ensure this is done correctly is to look at the other installed tine pivots in the dishrack and ensure the supports have no freedom to move longitudinally after the tine pivot is in place. If the supports can move forward and back freely or will not stay vertical, remove the tine pivot and ensure it is repositioned so the support will not move longitudinally. Have fun!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJoan from Baldwin NY
Lower level was missing screw and was also missing parts to help dishes stay up
Screwed new screw onto arm of lower rack
Snapped tine pivots into place
|
1 of 10 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
CustomerDIhan from Irving TX
Dishwasher was not washing properly
now the dishes come out clean.
|