2100074-1-S-Whirlpool-99002735-Tine Pivot
2100074-1-S-Whirlpool-99002735-Tine Pivot 2100074-2-S-Whirlpool-99002735-Tine Pivot http://www.partselect.com/Schematics/Maytag/54126.gif

Tine Pivot

PartSelect Number PS2100074

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Compare At

    $8.30
  • You Save

    $1.38
  • Your Price

    $6.92
Special Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 13 reviews What's this?
1-13 of 13
 

18 of 23 people found this instruction helpful

Parts Used:
  • Tine Pivot
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: ELAINE from COOS BAY, OR

The clips holding folding parts of the dishwasher rack had broken, so I ordered replacement clips.

I snapped the new parts onto the old parts of the dish rack. Voila! All done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Mike from Brooklyn Park, MN

2 broken plastic dishrack tine pivots. Middle rack rusted rod.

Removed and replaced middle rack. Installed new upgraded roller clip on wheels. Installed new plastic dishrack tine pivots being careful not to break them.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Carole from Noblesville, IN

Folding dishracks had broken latches to hold them in place making it impossible to properly "stack" my dishes. I actually called this the dishwasher from hell until I found partselect and was able to get the parts needed to fix those darne d folding racks. Now it's like a new dishwasher.

Simple removed the paperclip I put in place last summer to hold the rack in place, snapped both new parts where they belonged, and WOW, it's like new. So easy. And the best part was that I had the replacement parts in less than 24 hours! Talk about fast service.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Tim from Saginaw, MI

Water not draining & dirty dishes

Looked on line for replacement parts and found this website along with drawings, videos and owners who had the same problems and followed their descriptions on how to fix the different items I had to deal with.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Donna from Grapevine, TX

One rack adjuster failed and the tine piviots wore out due to age.

I had changed a rack adjuster several years ago but decided to take a look at your videos before starting the repair. I watched both videos and then did exactly as suggested. The repair went very quickly and was extremely easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Tine Pivot
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jay from Arlington, WA

One of the dish rack tines broke when I forced a large platter into the rack

It took a few minutes for me to reallize that I needed to look at the way/direction the tine clip was in the existing position. It is important to mesh the part into all the correct positons before trying to complete the repair into the final snap/placement of the tine/clip. A minute or two of looking and (really important) not trying to replace both front AND rear tines at the same time! They are mirror images of each other. If you change one at a time, you can use the other as a template!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Tine Pivot
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jeffrey from Mill Valley, CA

The dishrack tines were falling over and not holding the plates.

It only took a couple of seconds to snap in the replacement dishrack tine pivot parts. I didn't know how easy it was to get replacement parts and lived with the problem for months. The parts were easy to figure out on the website and arrived in a couple of days. Problem solved.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: PAM from GRAPELAND, TX

Plastic parts broken

Everything just snapped in to place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
  • Tine Pivot
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Zack from Suwanee, GA

Broken dishrack tine

I snapped the old broken one off and snapped the new on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
  • Tine Pivot
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gwen from Oconomowoc, WI

Broken tine pivot

pulled broken piece off and snapped new one on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
  • Tine Pivot
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Paul from Sandy Springs, GA

Dishrack tine pivot broke when adjusting

This repair did not require tools, but the positioning of the rack supports that the tine pivot holds in place did need to be positioned such that the tine pivot held the supports correctly in place without wiggling. The easiest way to ensure this is done correctly is to look at the other installed tine pivots in the dishrack and ensure the supports have no freedom to move longitudinally after the tine pivot is in place. If the supports can move forward and back freely or will not stay vertical, remove the tine pivot and ensure it is repositioned so the support will not move longitudinally. Have fun!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Joan from Baldwin, NY

Lower level was missing screw and was also missing parts to help dishes stay up

Screwed new screw onto arm of lower rack
Snapped tine pivots into place

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Customer: DIhan from Irving, TX

Dishwasher was not washing properly

now the dishes come out clean.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-13 of 13