2100002-2-S-Whirlpool-99002654-Wash Arm Cap
2100002-2-S-Whirlpool-99002654-Wash Arm Cap 2100002-1-S-Whirlpool-99002654-Wash Arm Cap

Wash Arm Cap

PartSelect Number PS2100002

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Unusual Noise.
  • Compare At

    $4.27
  • You Save

    $.71
  • Your Price

    $3.56
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

209 of 410 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Socket set

CustomerCHRISTOPHER from Spalding NE

Wash quality was getting bad

THE UPPER ARM WAS HELD IN BY A TORX SCREW. THE SHOULDER ON THE SCREW HELD THE ARM IN PLACE. ONCE REMOVED I SIMPLY SWAPPED PARTS AND INSTALLED SCREW. THE LOWER ARM WAS HELD ON BY A PLASTIC NUT WITH KNURLED EDGES THAT YOU CAN REMOVE BY HAND. THE ARM SIMPLY LIFTED OFF AND I SWAPPED ARMS AGAIN. THE ROLLERS ARE HELD ON BY A CURLED PLASTIC LOCK THAT GRIPS THE WIRE BASKET.

Help other customers find the most helpful instructions.

Were these instructions helpful?

20 of 23 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerEric from Newton WI

Dishes were coming out dirty with specs of debris on them

I noticed there was a filter type of material in the bottom of the dishwasher that had a small tear in it and figured that was my problem. I removed the nut from the sprayer arm at the bottom of the tub, removed the sprayer arm, removed 3 screws of the plastic cover below that. Removed six screws on the plastic cover below that. Removed one screw fron the center of the black pump spinner wheel that allowed me to lift off that cover. Then I lifted out the flowplate assembly. Placed the new part in and reversed the steps. Works like new again! All for about $30...I am not trianed in any way and have no experience in this kind of thing but am motivated trying to avoid a large service bill for a few screws. I am so happy...Thanks PartSelect!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerCasey from Wadsworth OH

Dishwasher wasn't cleaning well, especially top rack

I wanted to get the dishwasher cleaning better and thought that maybe the accumulator needed to be replaced. I figured that I'd swap out all the spray arms as well, just for good measure.

I needed Torx screwdrivers (T15 and T20, I think - not 100% sure on that) and patience because there's really quite a lot of screws to get the accumulator out. Finally got to it and it didn't look damaged, but replaced it anyway.

The spray arms are easy - they just snap in except for the lowest one, that had a plastic nut. I ordered a replacement nut just in case I broke this one (you know how that goes) taking it off. Well, it took pliers, but it came off ok.

In the end, my dishwasher is happy and cleans much better now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGeorganne from Carolina Beach NC

The dishes in the dishwasher weren't getting clean. I decided it would be cheaper to replace the clogged wash arm myself, before calling a repairman.

First, I removed the screw, then I took off the old wash arm, then I replaced the wash arm, and replaced the screw. Nothing could be easier!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4