2099992-1-S-Whirlpool-99002644-Door Striker
2099992-1-S-Whirlpool-99002644-Door Striker 2099992-2-S-Whirlpool-99002644-Door Striker 2099992-3-S-Whirlpool-99002644-Door Striker

Door Striker

PartSelect Number PS2099992

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failed.
  • Door won’t close.
  • Compare At

    $4.27
  • You Save

    $.71
  • Your Price

    $3.56
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 4 reviews What's this?
1-4 of 4
 

5 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerGlen from Clanton AL

Handle latch broke and door difficult to open

Removed the inside door panel using a power screw driver and torque bits. (5min) Removed the handle and latch assembley from the door. Door and Latch assembly was removable after the inner door panel was removed as 2 of the torque screws that held the panel also held the assembly. (1min) Removed the remaining 7/16 hex head screws that held the power and operators panel assembly to the outer door frame. (2min) Removed the electrical ribbon tape that supplies voltage and electrical functions to the rest of the washer so the panel could be physically be removed as the tape recipitical is attached to the door harness. (1min) Also be aware that the ribbon reciptical requires a small plastic clamp ring to be pulled forward to allow the ribbon to be reinserted. Put back together in reverse order. Use caution not ot over tighten screws that are use in plastic or vinyl materials. (20min)

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Striker

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerStephen from Kopperl TX

The striker broke when repairing something else.

I pulled the machine from under the counter top and the striker is right in front just under the insulation. I pullled the insulation back just a little and screwed down the new striker plate. That's all. I moved the machine back uinder the counter and secured it. Done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Door Striker

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMike from Haskell NJ

Striker broken

Was really easy to replace just unscrew the dishwasher and remove from under the counter about 3 inches. No need to disconnect the water line or electric. Unscrew one Torx (star) screw and put the new one in. Simple, just have the screw driver before you start.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerLARRY from MUNFORD AL

Handle broken

parts arrived in timely manner, they were correct and repair went well

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4