This part is sold individually and does not come with push nuts. Must order the push nuts separately.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Amana, Jenn-Air, Admiral.
Part# WP99002589 replaces these:
AP6014446, 99002589
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
3.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Linda H - April 17, 2018
Verified Purchase
Disappointed
The picture of this part showed 2, but I only got one. For the price, I felt it should have been 2, and a seal for only one side doesn't help me at all.
★★★★★
★★★★★
PATRICK R - February 22, 2018
Verified Purchase
Fail
What a joke 40 for two pics of stamped rubber and 40 for two tiny washers highway robberu
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
broken handle/latch that locks door
anterior door, star allen set to undo, hot/neutral wires. will disconnect with some difficulty, ok to break. new latch is a large complete unit with new hot/neural wire attachments. The snaps that are apart of exterior of maytag are likely broken if the latch is but the anter start screws keep it more than stable. reassemble a
... Read morenterior with screws. its a good idea to order and replace the rubber corner door seals at the same time if the unit is some yrs old. very easy. they will snap off/on.
The seals were deteriorated at the lower part of the door and allowed leaks. The door latch broke out twice, so replaced whole handle mechanism this time.
The repair is simple open the door and remove the perimeter screws and lift the door panel up. Be careful of attached wires. The handle only requires that you remove two electrical connectors and reconnect to the new latch handle and realign it with the screw holes in the door panel. The seals are not as easy to change they are attache
... Read mored with spring clips that I had to snipe through to get the old seals off. The new seals did not come with new spring clips, so I flattened the clips and reused them, they did not hold as tight, but seemed to work. Then just reinstall the panel.
I first replaced the door seal and that did not stop the problem but noticed two little seals on the door. They were terribly worn so I unscrewed the door and cut the little washers that were holding the old ones in place. I replaced the seals and put the cut washers back on (I didn't have new ones) and it was done. All is well.
Brooke from Edmond, OK
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
33 of 41 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
July 24, 2019
So if my dishwasher did not originally have bottom door seals, how and where exactly do i install the replacement (part # 99002589)?
For model number ADB1500AWZ
Hello Greg, thank you for your question. This Bottom Door Seal for your model is located at the bottom of the Inner Door, number 8 on the Door schematic for your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
James
October 21, 2021
does not have part 99002589 installed
For model number mdb6601aws
Hello James, thank you for writing. The part number for the Bottom Door seal you had referenced is PartSelect Number PS11747685. We hope this helps.
Was this helpful?
Thank you for voting!
Kelly
April 5, 2019
Replacing inner door panel, current existing panel does not have bottom corner seals (wp99002589)... are they necessary? because this unit sure didn't have them. it also doesn't have the metal support bracket across the top inside of the inner panel, is this also not necessary? could these items have been missed from the factory?
For model number mdb5601aws
Hello Kelly, Thank you for the question. Checking the model number information it does show the appliance does require these items and should have been included when the appliance was bought. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
