Lower Dishrack Assembly - gray

PartSelect Number PS2099772

This lower dishrack assembly is gray in color and comes complete with attached wheels. It is twenty-three inches wide and twenty-four and a half inches long.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 8 reviews What's this?
1-8 of 8
 

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSharon from FAllon NV

The racks were very rusted and falling apart.

Just undid the brackets holding the top rack in place and put in the new racks, locked the brackets and in the bottom put the water tower on and slid that rack in place, and bam we were ready to turn it on. It's wonderful, all new and clean. LOVE IT!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lower Dishrack Assembly - gray

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Covina CA

Worn rack spikes

Studied old rack to determine how to remove the center tower as the new rack did not come with one.
I found a small soft tab at the bottom of the tower that released so it could be turned and lifted out and put into the new rack, reversed and locked into the new rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAnne from Portland MI

Baskets were rusting on top and bottom of dishwasher

took out the old ones and put in the new ones

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lower Dishrack Assembly - gray

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKen from Hampstead MD

Lower rack assembly was deteriorating and causing rust spots on the dishes.

Wife was displeased, I bought a replacement and slid it in and presto, no more rust spots on the dishes. I will use the old rack in the garage for cleaning engine parts. Easy fix for a reliable old machine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerMaryLou from Bryan TX

Two of the he silverware basket sections were broken, and the lower tray was worn to the metal, causing some edge-stain on dishes.

The basket and the lower rack lifted right out, and the new ones inserted.
The only problem was that one wheel sent with the new rack was broken during shipping. It wasn't a big problem b/c one of the old basket wheels could be removed and snapped into place on the new dish rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Lower Dishrack Assembly - gray

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerPatti from Baltimore MD

Lower dishrack in dishwasher was rusting and falling apart.

Removed the old dishrack. Removed the plastic water sprayer assembly and attached it to the new dishrack. Removed the utensil holder. Replaced the new lower dishrack (slid right in). Replaced the utensil holder and voila! Works perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMARY from WHISPERING PINES NC

Dishracks were rusted

unhooked the top rack and attached the new one.

lifted out the bottom rack and slid the new one in

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lower Dishrack Assembly - gray

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMellissa from Baltimore MD

Rusting lower rack in dishwasher

called the local dealer to make sure of correct part # and an alternate part #, would take a week to order, called PARTS , they had the part , said it might take 5-8 days, it came the very next day and it took longer to open the box than to replace the rack( was about $30 cheaper than the dealer). thank you very much.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-8 of 8