Door Latch Assembly with Switches- NO Handle

PartSelect Number PS2099682

This part comes with the two door switches but does NOT include the handle. *** Handle sold separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failed.
  • Will not start.
  • Compare At

    $97.52
  • You Save

    $16.25
  • Your Price

    $81.27
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 7 reviews What's this?
1-7 of 7
 

17 of 20 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerRobert from DuBois PA

Door would not latch

simply remove the ten screws, lift up the inner door. Disconnect the four electrical prongs on the latch assembly. Connect the new assembly and replace screws. Very simple. Saved 100 dollar service call

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 11 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRandy from Corona CA

Latch assembly broken as well s panel control

I removed the screws from the inside of the door
I removed the existing Control panel (carefully) because the circuit board was also attached here.
I installed the new latch assembly on the new control panel.
I reattached the circuit board and reinstalled all of the screws - now it works great!

Everything for under $100 and less than 30 minutes! Thanks for the parts!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerStan from Yucaipa CA

Broken latch handle. Washer would not start.

Replacement parts were an exact fit. This always a concern when part numbers have been replaced with a new part number. Removed torx screws from door. Separated door shell, unplugged two micro switches, removed old latch and handle, replaced with new. Previous on line advice was helpful, but repair easy and quick.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Socket set

CustomerJoseph from Dover DE

Touch pad inoperable and latch hande & latch broker

Disassembled inside door and replaced sensor board and latch devide and handle. I removed all the screws on the inside of the door, released the circut board(sensor board or control board) and removed each connection one at a time and pluged them one at a time into the new board. I studied the setup before I disconnected anything. Oh yes, I turned off the breaker in the basement before opening the panel on the inside of the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

Customerraymond from saratoga CA

Door lock would not engage. So since the door wouldn't lock, the dishwasher wouldn't run. (it's safety mechanism)

I removed the door panel by unscrewing the 12 allen screws and found that the handle hinges broke & latch assembly locking gear was worn down...just normal wear & tear. this diagnostic process just took 45 minutes...remove the door, identify the problem, remove the parts, reassemble the door. I then ordered the parts online.

Once the parts arrived, it took me less than 45 minutes to re-remove the door, reconnect the 4 wires to latch assembly, snap the latch handle into place, and reassemble the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Latch Assembly with Switches- NO Handle

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

Customerted from leeds MA

The door wouldnt latch

I took off the inside door panel, then it pops off and I pulled off the wires with pliers. Finally, I took off the handle, redid all the steps in reverse and it worked mint!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerDexter from Westborough MA

Latch mechanism/handle broken

removed screws
disassembled door panel
installed new handle, switch and control panel
reassembled door panel

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-7 of 7