Dishrack Guide Rail Stop

PartSelect Number PS2099534

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $6.00
  • You Save

    $1.00
  • Your Price

    $5.00
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 26 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used

  • Dishrack Guide Rail Stop

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Wrench (Adjustable)

CustomerStephen from Wappingers Falls, NY

Broken rail stops

removed old and broken and replaced. The best part was, the turn around time from partselect. The fastest delivery of anything I ordered that part a 2 in the afternoon and had it the NEXT day, without specifiying any extra rush shipping. Right part too! Amazing job! Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Dishrack Guide Rail Stop

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerJudith from New City, NY

Old guide rails split in half

placed new guide rails on upper racks and clicked them closed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Dishrack Guide Rail Stop

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerThomas from Woodmere, NY

Top rack would fall out when it was pulled out

It was such an easy fix. All I had to do was fold the rail stop in half and slide it into the back of the rail. The hardest part was reaching into the dishwasher with the top rack in place. This repair was so simple and made a big difference.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerSusan from Suwanee, GA

End cap for roller guide and latch clip had been missing for a while and I had improvised with packing tape and wire. I wish I had known how easy it would be.

had to fiddle around just a bit to look at the others and see how these fit in. No tools were required - just snapped into place once I figured them out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSteven from Peabody, MA

Dishrack roller clip broke where clips onto wash basket

1st you must remove the guide rail stop which I bought just in case I needed to destroy the original to get it out since others said it was a bit difficult to remove. Turns out that if you look at the large picture of the rail stop, you'll notice that you need to stick a screwdriver into the side right near the endcap in the slot and pry the endcap toward you/front of dishwasher. Once you pry the encap toward you, you'll see there is a plastic hinge on the back end of the rail stop that holds this clamshell style clip together after the endcap is snapped apart. Time to slide out the old dishrack roller, slide new one in clipping it is intuitive, but you can cheat and look at how the other side of the wash basket and see how the other one clips since chances are you did not break both sides (or did you?!?!). Clamshell endcap back and snap in place, done.

Help other customers find the most helpful instructions.

Were these instructions helpful?