| |
3 of 6 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
Tools
CustomerJohn from Gibsonville NC
Whell mounting plate on upper rack snapped in two.
I brought the rack to my computer and pulled up your diagram. It was relatively easy to follow the diagram to install the parts. They didn't need any tools, just snap them in place. Wife factor, very high, she can now use the dishwasher again.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJames from Houston TX
Right side roller of upper basket kept coming off track because one of the 2 wheels was broken which came with the replacement strip. The plate was also broken and replaced to hold the strip in place. Easy fix.
Simply took old parts off and replaced them with new parts - no tools required.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJohn from Mission Viejo CA
Upper rack mounting wheel broken
The entire repair took less than a couple of minutes, and I'm not very mechanical. It was easy. I used a screwdriver to pry open the cap at the end of the upper rack's rail. Removed the rack. Attached the new pieces (simply snapped them on). Then, I put it all back together.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers
Customerkenneth from lompoc CA
My 22 year old son got drunk lost his footing and fell on top tray ,breakingwheels and mounting hardwear
The side that was broken,the wheels mounted to the tray itself not brakets so to keep cost down I had my wife buy parts to match otherside (two clip-on brakets,slide bar and wheels)and costom fit to the broken side which made the wheels to far from the slide-rail on the inside wall of the dishwasher so i spaced both side-rails out from the innerwalls withthe write size washers to make the slide-rails work,it will give us at least two to four more years of use unless someone falls on it again (I'm a 53 year old carpenter of thirty years and always have think ahead this time it worked,made my wife happy and saved my son money $$)
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMARC from ST LOUIS MO
It was nice to know that anyone can get on the internet and look up your company and order a part and have it here in less than three days.. the part was the correct one and went on very easily.. thank you for your help
Sanpped off the old parts and snapped on the new ones.. very easy..
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDawn from Glencross SD
Wheel mounting strip was warped. So we ordered the mounting plate and new wheels.
It was so easy! No tools needed, just pop out and replace exactly like you took it apart!
|
2 of 18 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerTimothy from Palm Beach Gardens FL
Rack and spray unit damaged by accidental fall of guest
R & R parts....good as new.
|