http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/52787.gif
See part 22 in the diagram
http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/52787.gif

Wheel Mounting Strip Only - NO Wheels

PartSelect Number PS2099474

Strip only. Wheels NOT included.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $24.35
  • You Save

    $4.06
  • Your Price

    $20.29
In Stock
Order within the next 12 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Mounting Strip Wheel

Part Number 2099507

This wheel is sold individually.

Order within the next 12 hrs and your part ships today!
$7.32
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 26 reviews What's this?
1-5 of 26
 

65 of 128 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerShaveta from Sterling, VA

Electric range oven's element wouldn't heat up and dishwasher's upper rack wont roll out

The sketches on PartSelect.com were very-very helpful, in picking up the parts to order and also while fixing the parts.

For oven range. First I removed the two screws that hold the flat top in place and lifted the flat top. I then unscrewed the two screws that holds the element kit. Disconnected the three wires, and replaced the broken element with the new one. All done.

For dishwasher, just snapped the parts in and all set.

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 30 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerWanda from Bay Shore, NY

Loose top basket/

I had two problems with the dishwasher. The top basket was loose, but the main problem was a plastic part inside the bottom assembly.

The part was backordered, so I re-ordered it through Sears. They said it would arrive in two days. Theirs came in two weeks, and their customer service was terrible.

Your "backordered" part came in two days, even before it was supposed to come had the part not been back ordered. I am delighted with your customer service and your company.

The illustrations on your website were excellent. They helped us not only to identify the part, but to diagnose the problem.

This was my first purchase through your company and if I ever need parts again, there is absolutely no reason to go anywhere else.

You have an excellent company, and great website! I bookmarked your page for future purchases.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Wheel Mounting Strip Only - NO Wheels

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerAnn from Grand Rapids, MI

Snap tabs for wheels on original part broken - resulting in the top rack being loose on one side and falling down when you touched it.

I aligned the V-shaped tabs on the inner side of the part with the slots in the mating part and simply pulled the old part out (it was already disengaged from the wheels in the metal rail). I then inserted the new part into the slots. One side went in well, but the other side required the part to be bowed slightly to match up the V-shaped tab with the slot. Then the hard part was getting the wheels in position to snap them on. Once in position, it took a bit of effort to engage the snaps in each wheel. I was afraid of breaking the new part. These snaps are very stiff and even with the notch between them there isn't any give, but I was able to apply enough constant, steady pressure to finally get them to snap in without breaking.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Wheel Mounting Strip Only - NO Wheels

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerGregory from Holt, MI

Upper rack falling out of slide rail

No Tools Required! unclip the end caps of the slide rails, slide the upper rack out of the dishwasher. Remove the broken Wheel Mounting Strip from the rack and replace with the new unit. Re-assemble the rack into the dishwasher and re-fasten the end caps. Don't forget to get the appropriate accolades from your spouse!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

Tools

CustomerJohn from Gibsonville, NC

Whell mounting plate on upper rack snapped in two.

I brought the rack to my computer and pulled up your diagram. It was relatively easy to follow the diagram to install the parts. They didn't need any tools, just snap them in place. Wife factor, very high, she can now use the dishwasher again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 26