Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2099287
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Located circuit breaker for dishwasher and turned off breaker to secure power going to unit. Removed water spray bar arm inside dishwasher basin by unscrewing center nut and unclipping tabs against arm. Removed sheet metal access panels on bottom front of unit. Removed two individual plug in wires to temperature thermister. Removed 4 conductor plug wiring going to motor. Removed ground wire going to motor frame. Located plastic handle which cam locks motor / pump assembly into place. Pulled handle down gently to unlock from detent and turned clockwise to release pressure on assembly. Removed motor / pump assembly from dishwasher enclosure. Installed all new parts purchased as listed above utilizing parts breakdown aquired from PartSelect.com. Reinstalled motor / pump assembly in reverse order as listed above. Tested and ran unit with no problems. Thank You PartSelect.com, Robert.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed all parts down to wash impeller following online videos and parts breakdowns (took a while to figure out how to do this). The only difficult part was separating the Discharge Pump housing from the Suction Plate. They are fitted together with friction, and a flat-blade screwdriver can push them apart. Replaced broken parts including Wash Impeller, Suction Plate, and Discharge Pump Housing. Purchased Filter Support because it was involved and appeared to have been damaged, but the new part looks identical to the old part. Purchased new o-ring & gasket to avoid digging them out of broken parts. Cleaned out the spray arms top & bottom and it now works like new!
Pulled both dish racks out then the spray arms. From there took everything else out down to the top of the motor. Replaced both spray arms and anything that a filter or a screen in it. Got everthing back together and ran the unit full of dishes with no issues at all.
there was buildup in the arms - we could see white chunks blocking the holes. we cleaned them out. using the diagram printed from you site we compared the other parts to the picture as we took them off. we determinted a few were bent or distorted or worn and ordered replacements. items arrived very quickly -in 2 days. (which does feel long enough when you are hand washing dishes). we put things back together in correct order using your diagram again and it's been clean dishes ever since. we also changed dish soaps figuring the build up was from that!! thanks for your help and your speedy delivery!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.