2099284-1-M-Whirlpool-99001790-Secondary-Filter-Screw-DISCONTINUED.jpg
2099284-1-S-Whirlpool-99001790-Secondary-Filter-Screw-DISCONTINUED.jpg 2099284-2-S-Whirlpool-99001790-Secondary-Filter-Screw-DISCONTINUED.jpg

Secondary Filter Screw DISCONTINUED

PartSelect Number PS2099284

Three of these screws are required per dishwasher.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 1 reviews What's this?
1-1 of 1
 

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Screw drivers

CustomerW. CARL from SAUGERTIES NY

Impeller broke up after 9 years of very hot water

I followed the excellent parts diagram on the PartSelect.com site to remove one screw after another, until I arrived at the disintegrated impeller.

After replacing it, I reversed the procedure, again refering to the diagram frequently.

In the process, I discovered that one part, the pump housing filter, had shrunk over the years, preventing the pump cover to seat properly. Although I had a few service calls in the past (we had a service contract until a month ago), no one could find the reason why the cover did not tighten down. I was told the screw holes were stripped, and it would not be worth replacing the whole base.

Anyway, I used a Dremel grinder on the filter latches to increase the diameter of the filter, and it fits now.

The nine-year old dishwasher runs like a charm again.

Incidentally, the ordered parts arrived within 24 hours! How do they accomplish such fast delivery?

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1