| |
13 of 16 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWilliam from Sheperdstown WV
My dishrack and silverware basket were broken
I just replaced them with new ones. Unfortunately the new dishwasher rack was not as sturdy as the original. Hence, when it is loaded the wheel assembly sags and the center portion goes lower. Therefore, while rolling it in and out it hits the center jets and requires that we pick it up as it rolls: acceptable inconvenience but not pleasing.
I fear that with many people using it, eventually the plastic top or plastic extension of the center jet will break off.
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerdonna from houston TX
My silverware basket was broken
I reviewed the choices available, found what I needed, ordered it, got it (quickly), and dropped it into the dishwasher....happy happy!
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:Less than 15 mins
Tools
CustomerGladys from Scotts Valley CA
No silverware basket in the dishwasher
All I did was put in the slot and it fit like a glove.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMike from Castle Pines CO
Dishwasher basket had holes in it
I replaced the old basket with the new one. Fit perfectly, now I do not have silverware falling through the cracks!
|
3 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerThomas from Centennial CO
Old shelf rack and silverware basket (yellowed & stained)
Removed the old dishrack shelf by taking off the end caps. A screw driver was used to release the plastic end caps. The old dishrack shelf is now able to just roll out and the new shelf is rolled in and the old end caps replaced. Quick and easy plus it makes the dish machine look new. The new silverware basket requires no tools just replace the old one.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers, Screw drivers, Wrench set, Wrench(Adjustable)
CustomerLawrence from Crownsville MD
Waterleak
I had to take the complete builtin dishwasher out of the base cabinet in the kitchen.
turn off electricity - circuit box
turn of water supply - turncock under sink
remove kickplate - screw driver
disconnect electric wires - screw driver
disconnect water feed - 5/8 wrench
remove top screws at counter underside - screw driver
pull out dishwasher - hands and son
turn dishwasher upside down - hands and son
got some water on floor - towel to mop up
remove top shower hose ( a rigid pipe with a screw fitting at top and a neoprene coupler at bottom) - hands
The neoprene coupler is the part that failed, it had worn thin due to heavy water flow
reverse process - same tools
voila - no water leak
I replaced a Silverware basket at the same time, which took two mintues as I had to remove the handle from the old basket and press fit onto new one - hands
Parts Select had the parts I needed and delivered in less than 48 hours. That is great service.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerduane from mesa AZ
I need a new silverware basket.
Replaced the old with the new.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJames from Penfield NY
Upper spray arm nut was worn out.
Unscrewed the old nut, attached the new arm to the new nut and screwed it in.
Getting the handle off of the old silverware basket was very tough but I did it with help from two of my kids. Why do they call it an 8-section basket when there are only 7 sections? Oh, well.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerElizabeth from Costa Mesa CA
Silverware basket falling apart
Ordered new part from your site. The new basket arrived in just a few days, without the handle and cover for the small item section. Instructions with with new basket described how to remove the other parts from the old basket and install them on the new one. Everything worked out perfectly and my silverware stays put. I've very happy!!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBetty Jean from Methuen MA
Silverware basket bottom was broken
Took the handle off the old basket and put it on the new one and it was done.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerGayle from Hockley TX
Silverware basket was missing
This web site was very easy to use. I went on the Maytag site and kept getting the run around. No parts! As soon as I had the model number I was good to go and the bin was here in a few days. Thank you for an easy and rewarding purchase. I no longer have to wash the silverware by hand.
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMichael from San Antonio TX
The part went in easy.
The part was easy to put in. Partselect mail it right away and I was very HAPPY with the service. The price was great . I would use them again when the time come up.
Mike Heath
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerGail from Odenton MD
Silver basket with too many large holes
I cant't believe I suffered with a silver basket with large holes and the silver falling through. It was so easy to order and the basket came In 2 days . Thank you for making my life easier Gail MD
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJames from Calhoun GA
Lower spray arm support broke
Ordered part and it was delivered the next day with the normal shipping! Very easy repair! Ordered a new basket because the old was breaking down!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
Tools
CustomerEllen from Louisville CO
Broken silverware basket, remove handle, put on new one
The eight section basket is really 7 sections, the handle can be removed and placed onto the new one instead of buying a new handle, but it was very difficult to get off. It took two of us about half an hour to get it off the old one.
|