Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2099035
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
Rail and Rack assembly items 2, 3, 4 and 5 have been reengineered for my model JDB2100AWS dishwasher. My dishwasher does not have the tines snapping into the rack assembly front and rear sides. They are free standing held in place with a one dual end combination retainer clip and pivot clip that snaps on the rack assembly bottom mesh. Jenn-air tines were not available. I thought Matag Tines may work.The Maytag tines P/N PS2099035 and PS2099036 will not work without some modification to the parts (i.e., bending and cutting) and the color does not match (i.e., light gray vs. dark gray). However, they did provide the insight to modify the existing Jenn-air tines. This may help other customers. Modifying the existing Jenn-air tines:1) Install the latch parts below.2) Position the existing tine vertical member in the latch.3) Mark the horizontal bar end that will extend outside of the rack to be cut (about 1/2").Note: Follow good safe practices when cutting the metal tine. Recommend using a Dremel tool and vice to secure the tine. 4) Cut the tine horizontal bar end that extends outside of the rack (about 1/2"). 5) Install the parts. Parts used and available:#4, P/N 99003190 (LATCH, FOLD AWAY TINE (FRT)) - QTY 1 #4, P/N 99003189 (LATCH, FOLD AWAY TINE (REAR))- QTY 1 #5, P/N 99003188 (PIVOT, FOLD AWAY TINE) - QTY 4 If needed, I can e-mail you a photo of the final assembly.
Help other customers find the most helpful instructions.
Were these instructions helpful?
The repair to the lower wash rack could be done with my fingers. Purchasing 4 parts was cheaper than buying a whole new rack.
I just had to line up the two rack holders and snapped on the latch to each rack as well as to the back of the sliding dish holder.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.