Part Location Diagram of WP99001359 Whirlpool Water Inlet Valve - 120V
See part 2 in the diagram
Replacing your Maytag Dishwasher Water Inlet Valve - 120V
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Water Inlet Valve - 120V WP99001359

★★★★★
★★★★★
13 Reviews

Rated by 26 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 72.20
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11747602
Manufacturer Part Number WP99001359
Manufactured by Whirlpool
Product Description

Water Inlet Valve - 120V Specifications

This water inlet valve is specially designed for those dishwashers of the vertical axis style and comes with a mounting bracket. The attaching solenoids on the valve open and close according to the desired amount of water needed.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Dishwasher Water Inlet Valve - 120V

Replacing your Maytag Dishwasher Water Inlet Valve - 120V
Troubleshooting
This part fixes the following symptoms:
Will not fill with water | Leaking | Not cleaning dishes properly | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Jenn-Air, Amana, Crosley.
Part# WP99001359 replaces these:
AP6014364, 903400, 99001359, WP99001359VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
13 Reviews
4.6
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 26 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
WATER WOULD NOT COME INTO THE DISHWASHER
Changing the valve only took about 30 minutes but reusing the fitting from the old valve I could not get it to stop leaking on the copper side of the fitting. I ended up going out and getting a new fitting and cutting the copper line to make a new connection. Then the problem was solved.
  • Michael from Ingleside, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable), Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no water entering the dishwasher
Shut off the water and electric then removed the cover at the bottom then removed the water inlet valve and replaced it with the new one. Turned on water and electric. Replaced cover at bottom. Very easy and the part was shipped quickly. No problems and the dishwaser works great now!!
  • frank from mountain home, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
not cleaning properly
First I removed the spray arms. I discovered that some holes were plugged and unplugged them. I checked the pump filter and it was OK. To make it easy to access the upper arm I removed the upper dish rack. Hint: push the plastic clips toward the center of the dishwasher to remove them. I noticed that the water level was too low. It was not filling in the time that the dishwasher allowed for the fill. I removed the valve and found that it was plugged with some black silt. I bought a new valve and replaced it. I let the water run for a while until the water ran clean before I connected it to the valve. The dishwasher is cleaning well now.
  • Allan from Mansfield, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no water on wash cycle
set dial to regular wash cycle, it was going through the cycles but only filled water on the rinse cycle.Did voltage check at water inlet valve during water fill stage, correct voltage being applied to valve but valve not responding. shot off water supply, turned off electric breaker,removed valve, did ohms test and that confirmed no continuity, with part# on valve ordering was a breeze.My wife said i enjoyed watching her do dishes by hand too much,the new valve arrived in a couple days[just in time the dishes were starting to pile up]and installed easily.Thankyou,Partselect
  • mitchell from scandia, MN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Amount of water insufficient
Took out existing water inlet valve and installed new.
  • Margaret from Coram, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishes were not getting totally clean.
I did not move the dishwasher out. It is a fairly tight space underneath, but the water inlet valve is located toward the front, so it wasn't too bad. The steps were:

1) unplug the power and turn off the water to the dishwasher.
2) remove the 2 wire connectors.
3) use the nutdriver to remove the 2 screws that hold the valve to the side of the dishwasher.
4) use a wrench (5/8") to remove the nut where the water goes into the valve. This takes some patience since you can't turn the wrench very far in the tight space.
5) remove the water outlet hose by using pliers to squeeze together the clamp and move it up the hose. Then twist the valve to free the hose and remove it from the valve. The nibs on the clamp are small and take a little time to get them squeezed together. If the hose has been on there a long time, you will have to twist the valve a few times to free it up.
6) now you will have to remove the sleeve that the nut was screwed onto. I had to take the valve to my vise to hold it. Then it wasn't too hard to remove.
7) use teflon tape before you reassemble. Just go in the reverse order.
8) hope there isn't a leak. Mine didn't.

The new water inlet valve seems to have fixed the problem!
  • Dennis from Liberty, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Wrench set
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My dishwasher just started leaving a white film on my dishes and leaving some food and discolloring my silverware after 10 years of cleaning without a problem
I replaced the water inlet valve that did not fix the problem. I took all of the jet rinse out and replaced it with new. That didn't work either. I put some vinegar in my dishwasher and that did better. I am at a stand still. It should just be simple. I took the whole dishwasher apart and no residue or hard water build up that I thought I would find. Looked brand new in motor and filter.
  • carol from murfreesboro, TN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water not flowing into dishwasher
turn off breaker
turn off water supply line
note wire color locations on notepad
disconnect 2 spade lugs (pliers)
disconnect inlet line (adj. wrench)
disconnect outlet line (pliers on hose clamp)
remove old valve assembly (4 screws w/nutdriver)
remove ground jumper from old valve
remove inlet pipe ell from old unit (vise & pliers)
clean open end of pipe ell (file)
apply teflon dope tape to pipe threads
install pipe ell on new valve
reorient solenoid 90degrees cw to match Maytag installation
reinstall ground jumper
install new valve assembly in dishwasher
reconnect hose and hose clamp
reconnect inlet line
reconnect spade lugs
turn on supply line, check for leaks
turn on breaker
start washer at appropriate cycle to test water flow
done!
  • Doug from Cornish, ME
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable)
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Water caused soap to not dispense & no clean dishes.
I took off the front bottom panel for an easy access. The valve is located on the left. Shut off water to the dishwasher. Remove the bracket that holds the valve. Remove hoses and 2 wires on the valve switch. Install new valve by revesing the steps above.
  • Robert from Brookdale, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water came out from under washer.....
pushed a butter knife in at seam near the top front each side,poped the lid and water valve upper right. it took a square drive screw driver to remove screws and a pair of channel locks to remove hoses. Be sure to mark hoses and wires for the put back. It's a very simple job,but pull the washer power cord first and shut the water off. The symptom was water continued to fill washer all through wash and after completion water still flowed in. Be sure to match the selected unit to the one in the machine. Hey,the lady that took the order was sweet and the service was first class, and I'm a hero for the fix.
Other Parts Used:
Water Inlet Valve - 120V Water Inlet Valve
  • Lois from Owenton, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MARIE
December 25, 2017
How do i turn my water and power off to start with? Thanks so much--this is a fabulous website
For model number MDB6000AWB
PartSelect logo
Hi Marie, Thank you for your question. You would have to turn the water off from your home to your fridge. There should be a valve shut off where you can do that. Either in a utility area or just behind your fridge. To turn off power to the appliance you can either unplug it or you could turn it off at your electrical box. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
David
March 21, 2018
My dish washer gets water in bottom but dose not spray water from top or bottom sprayers but dose get a little water in bottom of dish washer, will this part fix problem sounds like pump is working but no water pressure.
For model number DDW361RAW
PartSelect logo
Hi David, Thank you for the question. The Motor and Pump Housing Kit, PartSelect Number: PS2340913 circulates the water up through the spray arms. If the water is not circulating the pump may need to be replaced. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jim
July 1, 2019
Is p/n ps11747602 a replacement part for p/n ps2097242?
For model number Maytag model MDC4100AWE
PartSelect logo
Hello Jim, thank you for writing. This Water Inlet Valve part PS11747602 is the correct replacement part for your model. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
August 30, 2022
does the inlet valve come with the solenoid
For model number mdb5000awb
PartSelect logo
Hi Robert, Thank you for your question. Yes, the solenoid comes with the water inlet valve. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747602
Manufacturer Part Number: WP99001359
Brand
Model Number
Description
Amana
ADW662EAB
Dishwasher
Amana
ADW662EAB-PADW662EAB0
Dishwasher - Amana Dishwasher Model ADW662EAB-PADW662EAB0 (ADW662EABPADW662EAB0, ADW662EAB PADW662EAB0) Parts
Amana
ADW662EAC
Dishwasher
Amana
ADW662EAC-PADW662EAC0
Dishwasher - Amana Dishwasher Model ADW662EAC-PADW662EAC0 (ADW662EACPADW662EAC0, ADW662EAC PADW662EAC0) Parts
Amana
ADW662EAS
Dishwasher
Amana
ADW662EAW
Dishwasher
Amana
ADW662EAW-PADW662EAW0
Dishwasher - Amana Dishwasher Model ADW662EAW-PADW662EAW0 (ADW662EAWPADW662EAW0, ADW662EAW PADW662EAW0) Parts
Amana
ADW862EAB
Dishwasher
Amana
ADW862EAC
Dishwasher
Amana
ADW862EAS
Dishwasher
Amana
ADW862EAW
Dishwasher
Magic Chef
CDB3100AWE
Dishwasher
Magic Chef
CDB3100AWT
Dishwasher
Magic Chef
CDB3100AWX
Dishwasher
Magic Chef
CDB6100AWE
Dishwasher
Magic Chef
CDB6100AWN
Dishwasher
Magic Chef
CDB6100AWX
Dishwasher
Crosley
CDU510B
Dishwasher
Crosley
CDU510V
Dishwasher
Crosley
CDU610B
Dishwasher
Crosley
CDU610N
Dishwasher
Crosley
CDU610V
Dishwasher
Crosley
CDU810B
Dishwasher
Crosley
CDU810V
Dishwasher
Amana
DDW2470AWP
Dishwasher - Undercounter
Amana
DDW261RAB
Dishwasher
Amana
DDW261RAB-PDDW261RAB0
Dishwasher - Amana Dishwasher Model DDW261RAB-PDDW261RAB0 (DDW261RABPDDW261RAB0, DDW261RAB PDDW261RAB0) Parts
Amana
DDW261RAW
Dishwasher
Amana
DDW261RAW-PDDW261RAW0
Dishwasher - Amana Dishwasher Model DDW261RAW-PDDW261RAW0 (DDW261RAWPDDW261RAW0, DDW261RAW PDDW261RAW0) Parts
Amana
DDW361RAB
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service