2097872-1-S-Whirlpool-913108-Shaft Seal
2097872-1-S-Whirlpool-913108-Shaft Seal 2097872-2-S-Whirlpool-913108-Shaft Seal http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/39359.gif

Shaft Seal

PartSelect Number PS2097872

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.
  • Compare At

  • You Save

  • Your Price

In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.0 / 5.0, 1 reviews What's this?
1-1 of 1

3 of 8 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:More than 2 hours

ToolsNutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

CustomerFrank from Terrell, TX

Lower motor tub leaking

Had to remove the lower spray arm, then the cover exposing the housing assy. Then turn over the Dw and remove the wiring, disconnet the hoses drain and upper srayer. Release the locking ring. Lift the housing up and out through the DW. Then disassenble the housing removing the motor, drain assembly, and water blade assy. Then install the seal on the drain assy on the new unti, re-install the housing parts, and motor, then place in DW, re-install locking ring. re-wire, connect hoses. Replace the lower spray arm. Turn electricty and water and test for leaks. You have to really watch the seals.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1