2097176-1-S-Whirlpool-903052-Front Rack Bowl Tine Assembly
2097176-1-S-Whirlpool-903052-Front Rack Bowl Tine Assembly 2097176-2-S-Whirlpool-903052-Front Rack Bowl Tine Assembly

Front Rack Bowl Tine Assembly

PartSelect Number PS2097176

This front rack bowl tine assembly is eight inches long. It is gray in color and is made of plastic. This tine assembly is used for Maytag brand dishwashers.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

3 of 5 people found this instruction helpful

Parts Used

  • Front Rack Bowl Tine Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCharles from New Milford NJ

The rack had disintegrated and plates could no longer be stacked in that section of the dishwasher.

1. Remove broken part
2. Put new part in its place ...it just snaps in.
3.Smile...it fit, it's done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerSteven from Fort Myers FL

Front and rear tine assembly had rusted out

I had already removed the old racks so I could compare them to diagrams on line. I set up the replacement parts in the same way that the old racks were connected, re-using the brackets. I then installed the entire assembly, front and rear racks plus the brackets, onto the bottom dishwasher tray using the clips that were part of the brackets.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2