2092000-1-M-Whirlpool-7739P122-60-Fan-Knob.jpg
2092000-1-S-Whirlpool-7739P122-60-Fan-Knob.jpg 2092000-2-S-Whirlpool-7739P122-60-Fan-Knob.jpg

Fan Knob

PartSelect Number PS2092000

This knob accepts a D-shaped shaft.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not start.
  • Compare At

    $15.82
  • You Save

    $2.64
  • Your Price

    $13.18
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 10 reviews What's this?
1-10 of 10
 

10 of 19 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers, Socket set

CustomerGerald from Saratoga CA

Dual element switch was defective. Found the part on the partselect website. Part arrived in several days. Very fast delivery. The replacement switch was quite different from the original, but the schematic diagram on the partselect website showed how to connect up the new switch. I am impressed

Remove cooktop and placed on work bench. Removed bottom assembly by removing sheet metal screws. Removed switch bracket and then switch. Scratched head for awhile as replacement switch was quite different from original. Checked schematic on website which showed how to connect up new switch. Reassembled. Wife now talks to me again now that her favorite stove burner is working.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 9 people found this instruction helpful

Parts Used

  • Fan Knob

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKalman from Castle Rock CO

The fan knob that was original factory stopped popping up

1) Take the old knob off by pulling straight up 2)Make sure to completely remove parts that may have stayed in the hole 3) push new Fan Knob on make sure to line up properly for the D. Don't be nervous if it looks a little different than the original factory. Much better design and this company shipped when promised. Very easy to see what you need and no hassles.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers

CustomerJean from Owings Mills MD

Fan knob appeared to be wrong part

I couldn't figure out how to install the new fan knob because the D connection wasn't visible. I called the help line, and was connected to a very helpful person. She read some other reviews, and we determined that it is often necessary to remove additional parts of the previous knob before installing the new knob. I got a pair of pliers, and then had the nerve to really yank out the previous part remnants. The knob then attached with ease. I wouldn't have known what the problem was if I hadn't talked with this very helpful person.The key is--if you are installing the knob with the D connection, and you don't see a D receptacle in your old part, be brave and really exert force to pull the remaining pieces of the old knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Fan Knob

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerElmo from Landrum SC

Broken fan knob assy

I used needlenose pliers to remove part left on shaft, regular pliers are too big. The original part had a metal insert so there was some rust and build-up on the shaft. I cleaned it with WD40. The new knob took a good bit of hand pressure to install.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerIsabel from Long Beach CA

Purchased new electric stove

In these hard times it's hard to remodel a well needed room in the house, however we were able to find a brand new electric stove that was worth $600.00 but was on clearance for $150.00 because it was missing the knobs. Thankfully a good friend recommended that I look through your website and I found the knobs for under $50.00. Thanks to partselect I was able to get the electric countertop stove I wanted and saved hundreds of dollars !!!! Thanks partselect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Fan Knob

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerKatherine from Arcadia CA

Fan knob broke

Read the other folks descriptions of how they pulled out the leftover parts with needle nose pliers after they figured that the new knob would not fit with those other parts still on the range top. Took the leap of faith, pulled the parts out until I got to the D knob and slid the new part right on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Fan Knob

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerRobert from Northville MI

Sticking/broken pop up knob

I used needle nose pliers to remove the broken piece then pushed the new knob on!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Fan Knob

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerJames from Sacramento CA

Knob on the exhaust fan was broken

Simply removed old knob and replaced.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerWilliam from Sanger CA

Jenn-air is an overrated piece of crap!

Purchased replacement knobs and they fit fine. This was a rare experience where the replacement part actually worked!

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 436 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGLENN from White Hall MD

Had burned knobs on range

Ordered parts and got them in 1-2 days...really fast. Simple replacement.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-10 of 10