| |
10 of 11 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJames from Chesapeake VA
Could not control burner temp.
removed back cover
removed wires
removed two screws and removed switch
replaced switch and two screws
replaced wires and back cover
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerPhilip from Houston TX
Indicator lens melted and fell back into the control panel
I took the back panel off, removed the old lens, installed the new lens. How easy to order from home, receive the part, do the repair and pay less than it costs to simply drive to the parts house. Cool....
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerJERRY from VISTA CA
Thermostat was not allowing the ovn to hold temperture.
Removered top back panel, cover plate and half of the back plate. Replaced the thermostat and light lens and light indicator. Replacement of ordered parts was fast and easy. Delivery was fast and easy. All factors rate a 10. Thanks for the speed in completing my order.
|