2091057-1-S-Whirlpool-77001096-Outer Bake Element - 2800W
2091057-1-S-Whirlpool-77001096-Outer Bake Element - 2800W 2091057-2-S-Whirlpool-77001096-Outer Bake Element - 2800W

Outer Bake Element - 2800W

PartSelect Number PS2091057

This bake element is found on the bottom of the oven.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Compare At

    $27.82
  • You Save

    $4.64
  • Your Price

    $23.18
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 4 reviews What's this?
1-4 of 4
 

8 of 10 people found this instruction helpful

Parts Used

  • Outer Bake Element - 2800W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPhilip from Severna Park MD

Modern maid oven, bake element barely warming

1. Locate range breaker and switch off.
2. Verify range has no power by switching fan or light on.
3. Have someone shine flashlight beam on inside back of oven.
4. Use screwdriver to remove two screws holding outer element to back of oven wall.
5. Carefully pull element out until wires attached to ends of element can be seen.
6. Pull connectors off ends of element, don't let them pull back into the insulation material.
7. Connect new element to wires.
8. Push element back into position and re-attach the screws.
9. Make sure that the element is resting nicely on the floor of the oven.
10. Reset the range breaker and test the oven.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerCraig from New Haven MO

Element went out

plugged it in screwed it in placed grease filter in place DONE 3 minutes tops piece of cake!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Outer Bake Element - 2800W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerTommie from Liberty MO

It fried half way through and needed replaced.

Took out two screws, threw the old one away, and put the two screws back in. Then washed up.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Outer Bake Element - 2800W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJAMES from SYLACAUGA AL

Bake element would not heat up.

Really easy!! Cut off Breaker so the Range had no power. Use phillips head screwdriver, remove the two screws holding the bake element in. Remove connectors from element. I put (heat shrink) wrap around the female connectors then attached them to the element, heated the shrink wrap, replaced the screws and cut on the breaker / power. Turned on the oven (350) to "bake" off the oil film off of the element. (Element will smoke / smell for a few minutes).

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4