BBB A-Plus
2091055-2-M-Whirlpool-77001094-Bake-Element.jpg
2091055-2-S-Whirlpool-77001094-Bake-Element.jpg 2091055-1-S-Whirlpool-77001094-Bake-Element.jpg

Bake Element

PartSelect Number PS2091055

Please note: This is a substitute from the original part. It may physically look different, but will still function the same. This bake element is found on the bottom of the oven.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little or no heat when baking
  • Cooktop element not heating
In Stock

  • Compare At

    $40.93

  • You Save

    $6.82

  • Your Price

    $34.11
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 3 4 NEXT > 46-47 of 47

 

0 of 2 people found this instruction helpful

Parts Used

    • Bake Element

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSharon from Sturgis MI

Lower bake element burned out

Two screws in the oven removed the old part and the wires unplugged from the unit. When the new part came in , it was plug and play. Plugged the wires into the new part, put part into holes in oven and screwed the screws back in place and we were ready to go. The part was here in record time. We ordered it on Sunday, it shipped out on Monday, it arrived on Tuesday and we were back in operation! Thanks for a really smooth repair experience!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

    • Bake Element

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDerek from Gilford NH

Baking element overheated and split into two parts.

First removed 2 screws holding in element housing at the back of the oven. Pulled element out and disconnected wire leads from the the element connection points. Reconnected leads from new element, pushed back into the back of oven and rescrewed into the oven housing. Done, very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 3 4 NEXT > 46-47 of 47