2089549-1-S-Whirlpool-7404P098-60-Thermostat
2089549-1-S-Whirlpool-7404P098-60-Thermostat 2089549-2-S-Whirlpool-7404P098-60-Thermostat 2089549-3-S-Whirlpool-7404P098-60-Thermostat

Thermostat

PartSelect Number PS2089549

This temperature sensor detects the temperature within the oven cavity.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $119.68
  • You Save

    $19.95
  • Your Price

    $99.73
In Stock
Order within the next 18 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

13 of 16 people found this instruction helpful

Parts Used

  • Thermostat

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMichael from Grand Rapids MI

Oven overheated

Shut off all electrical power to oven.
Remove 3 phillips head screws from top trim assembly and remove the trim panel. Carefully tip out the front panel. It will hang by the wires connected to the light switch or pull off those wires also and set it aside. Now remove the 4 screws holding the sub panel to the oven. Slip off the 2 spade terminal connectors on the thermostat. Remove the 2 screws holding the thermostat assembly. Remove the thermostat and unsnap the sensor assembly inside the upper panel in the oven. Pull the sensor through the hole in the top of the oven. Install the new thermostat in reverse order being careful to not kink the sensor cable.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

  • Thermostat

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerscott from norco CA

The thermostat would not shut off the oven

first I removed the two screws on the top of the oven frame that hold the face plate on. then I tilted the face plate out and diconected the thermostat, pulled out the element from the oven and replaced with the new part. Turned the breaker back on and was finished.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2