2088650-1-M-Whirlpool-74011337-Hinge-Bracket-Left-or-Right-Side.jpg
2088650-1-S-Whirlpool-74011337-Hinge-Bracket-Left-or-Right-Side.jpg 2088650-2-S-Whirlpool-74011337-Hinge-Bracket-Left-or-Right-Side.jpg 2088650-3-S-Whirlpool-74011337-Hinge-Bracket-Left-or-Right-Side.jpg

Hinge Bracket - Left or Right Side

PartSelect Number PS2088650

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t close.
  • Compare At

    $28.85
  • You Save

    $4.81
  • Your Price

    $24.04
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Hinge - Left or Right Side

Part Number 2087649

As per the manufacturer, when replacing the hinge, they recommend to also replace the hinge receptical also knows as the bracket.

$31.63
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

6 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerDaniel from Rochester Hills MI

Oven door would not close tightly.

DOOR HINGE: Lifted the door out of place and layed it on the floor. Removed the six screws (three on top and three on bottom) from the door to remove the front panel exposing the hinges. Removed three screws from each hinge to remove them. Reversed the process to complete. HINGE BRACKET: Would recommend replacing these with hinges. After removing the screws that hold the oven in I pulled the oven out about four inches. Brackets are now easily removed and replaced, two screws each. Slide the oven back resecure and your done. DOOR GASKET: Just pulled it out and snapped in the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Hinge Bracket - Left or Right Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDaniel from Rochester Hills MI

Door would not close tight enough.

Removed the door and the screws that secured the oven to the cabinet. Pulled the oven out about four inches to provide access to the hinge brackets. Removed two screws on each bracket and removed the brackets. Reversed the process and all was well. Works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Hinge Bracket - Left or Right Side

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJohn from Newport RI

Oven door would not close all the way, light stays on.

First I removed the oven door - with door fully open pull the clips on the hinges all the way out, then close door as far as it will go and lift the door up and off the oven.

Then I removed the three screws on each side, that hold the oven to the wooden cabinet. I then slid the oven unit out from the cabinet about 6 inches, to gain access to the hinge receptacles.

I then removed the 2 screws that secure the receptables to the oven body, and replaced the receptacles.

Reverse steps to put it back together.

Works like a charm.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3