6 of 7 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerPete from Longwood FL
Center element of triple burner was not working.
I pulled the unit out from the wall. Took the screws out along the sides. Removed screw holding the front controls loose. First I changed the control switch which was very easy. Two screws and a couple of wires. The burner was a bit more tricky. I had propped the glass cook top up so I would not have to disconnect to many wires. Took out the screws holding the burner in place and disconnected the wires. I removed the clips from the old burner and attatched them to the new burner, then reinstalled the new burner. The only real problem was the wires. I forgot the order of a couple of them. I was able to check on line and get the correct order.
6 of 11 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsNutdriver, Pliers, Screw drivers
CustomerColin from Ventura CA
Element burnt out
It was fairly easy if you a handyman there is a few things to to figuer out like taking the glass top off once that was done and you can see the elements it's easy to do from there.