2 of 6 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers, Wrench set, Wrench(Adjustable)
CustomerMitch from San Jose CA
Burners were leaking gas, igniters didn't work
I had to use a pipe wrench to remove the burners. They were pretty stubborn to remove from the insert. Once this was done, I installed the ingniters into the underside of the burner, then installed the venturi tubes. After that, installing the burners only took simple placement and a quarter turn to lock them in. I adjusted the burner with a screwdriver and wrench as per the manuals instructions and that is all it took. I did a repair that cost me approx $150.00 to all 4 burners instead of buying two complete new burner inserts for $600.00 and it took less than 1 hour to do. I would do it again anytime.