2086377-2-S-Whirlpool-74008919-Radiant Element - 2700W
2086377-2-S-Whirlpool-74008919-Radiant Element - 2700W 2086377-1-S-Whirlpool-74008919-Radiant Element - 2700W

Radiant Element - 2700W

PartSelect Number PS2086377

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.
  • Compare At

    $163.56
  • You Save

    $27.26
  • Your Price

    $136.30
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews What's this?
1-3 of 3
 

18 of 20 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers

Customervernon from Simsbury CT

Replace broken glass stovetop and one bad element

It was easy.Only two screws hold the top on.I removed them,disconnected the wiring harness and laid the top upside down.I unscrewed the clips holding the elements to the top and did not disconnect any wires.My son and I just picked them all up at once and transferred them to the new top.I replaced the bad element at this point.Then put it all back together.Easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 13 people found this instruction helpful

Parts Used

  • Radiant Element - 2700W

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerKeith from La Vernia TX

Inside burner not working

Found same problem on this Website. Ordered the part, read the two installation instructions. Step 1. disconnect stove. Step 2. remove two screws holding stove top (located inside oven door, on both corners. Step 3. Lift stove top, remove screws on burner (be careful, if a screw drops it can be fun finding it)I know))I removed the outside screws, this wasy you can replace the brackets one by one on the new burner, they are numbered around the outside. Step 4. I remove the electrical connectors one at a time, then installing each one on the new burner. Step 5. Install new burner. Step 6. Replace the two top screws. Step 7. Reconnect stove. Made my wife happy and she loves to cook.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 11 people found this instruction helpful

Parts Used

  • Radiant Element - 2700W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJeff from Rossville GA

Inner element on dual eye burned out

Two screws loosen the cook top so you could get to the six (or was it eight) screws underneath the cook top. Once those screws were out, three more screws were removed to take off the element. Disconnected a couple of wires and the old element was free to be removed. The new element went right back in and screws were put back in reverse order. Less than ten minutes from start to finish.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3