The hinges control the rate that the oven door opens and closes, and allows the door to stay open at an angle. This hinge can be used on either the left or right hand side of your oven, and is approximately 20 1/2 inches long. If your oven door will not open or close easily, you may need to replace this part. It may be a good idea to replace both hinges at the same time. If a spring has become loose on one hinge, the other hinge is likely to have the same issue. The repair is simple and only requires a Phillips screwdriver and a small bent nail. For a full step-by-step guide, check out the video below.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kevin S - Yesterday
Verified Purchase
Stove repair
The hinges I received from Part select were exactly right for the application in my JennAire oven. After disassembling the interior part of the oven door I was able to correlate exactly what hinge was needed and ordered these. They fit perfectly and worked very well when assembled in the stove
★★★★★
★★★★★
Brandon D - January 2, 2024
Verified Purchase
Easy repair. Fixes door that won't open without Hulk-like force
Replaced both hinges in less than 10 minutes. Just make sure that if the door won't fully close with the new hinges installed, check to make sure the locking pin is removed. One of the hinges I received had a small pin in it to disallow closing. Once that was removed - just slipped it out with a pair of pliers - the oven door opened/closed silky smooth.
★★★★★
★★★★★
Jeffrey G - January 6, 2023
Verified Purchase
Perfect
Easy install
★★★★★
★★★★★
Chip H - November 12, 2022
Verified Purchase
Wife keeps praising how the door operates!
Easy enough to DIY when the replacement part matches exactly.
★★★★★
★★★★★
Diane K S - May 15, 2022
Verified Purchase
The springs came in good condition and they were easy to replace
These springs were not the original springs which came with the oven, but they fit good and the instructions were easy to follow. However, they are not quite strong enough to keep the oven door completely shut, as the oven light tended to stay on unless you pushed in the door a little more. However, I did what someone else suggested. I bought some small magnets and now the door closes great every time and opens easily.
★★★★★
★★★★★
DOUGLAS J - January 30, 2022
Verified Purchase
Oven hinge
Exactly what was needed, worked like a champ, thanks
★★★★★
★★★★★
Jerold O - May 23, 2021
Verified Purchase
WRONG PART
YOU SENT THE WRONG PART
★★★★★
★★★★★
Erik S - March 30, 2021
Verified Purchase
Perfect fit.
Oven door hinges were perfect. Followed the video and was finished in no time.
★★★★★
★★★★★
James M - November 28, 2020
Verified Purchase
Door shuts better now!
I ordered these hinges because my oven door did not close all the way. Didn't make the light stay on but it was annoying and we thought it might be altering the temperature in the oven. I have to say that the video was very helpful. It let me see the replacement process so I had no surprises. The oven, an Amana, performs better now. We use our oven a lot so it was definitely worth the money to swap out the hinges. That this company takes the time to provide tutorial videos will make them the first stop for me when repairing my appliances.
★★★★★
★★★★★
Todd H - October 21, 2020
Verified Purchase
Great product just as described
We have an older double oven and I thought I would never find the part. Not only did I find the part but it was affordable and shipped in days!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 20 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Both door hinges was simply worn out from 20+ years of usage.
Bought a pair for needed door hinges for replacement. Found a DIY video on You Tube showing technique to replace. Door removal was a bit awkward but hinge replacement and door reinstallation was as detailed in video. Could not nor would not have tackled this project without video. Premium quality parts sent and received within days of or
... Read moredering. Wife happy therefore so am I.
Read less
Ron from SCROGGINS, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken oven door hinge
My daughter & I followed the instructions in your video and had fun repairing the door. The video showed exactly how to do the repair. I hope I don't need any appliance parts very soon but I will certainly pull up your web site if I do. Thanks for an excellent instruction video.
John - Hot Springs Village, AR
John from HOT SPRINGS, AR
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge on one side had snapped.
Although only one side hinge had snapped, I replaced both sides with new oven door hinges. Followed the website video installation directions and all went well; the new hinges work perfectly.
Michael from ALTADENA, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door hinge
My wife help take the door off. It was a little heavy . The door came apart very easy and went back the same way.We save over $300 by doing it our selfs.
Mr. Mike F from SAN ANTONIO, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken hinge
Took the door apart and replaced the hinge, very easy
Don from Exchange, WV
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven door would not close properly. Believe this caused control panel to fail from overheating.
Parts arrived as scheduled with no problems. First I removed and repaced the 2 oven door hinges to see if this would fix the problem with the door not closing all the way (had to push door to get the oven light to go out). Since no instructions were shipped with the new hinges, I followed the information given by other customers on how
... Read morethey were able to change the hinges. Changing the hinges DID NOT fix the problem with the door! The new hinges did not pull the door any tighter than the old hinges. Door closure problem finally fixed by supergluing several round mangnets (Lowes) to the door which pulls the door tight when closed. I learned this trick from another customer's report (thanks for the idea!). Next I removed and replaced the failed control panel. This was the second panel to fail on this oven in the 5 years it has been installed! The first panel was replaced under warranty after approx 2 years of use. Hopefully, the magnets will keep the oven door closed and prevent overheating of the control panel which will allow this poorly designed oven to last a little longer this time!
The repair was very easy to perform, but the springs in the new hinge were not as strong as the old one. The door would not close all the way unless you held it closed. The hinge looked identical but spring had less tension.
Larry from Oak Grove, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
6 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Old Hinges broke off and the door would not stay closed
I removed the single screw on each side of the oven by the hinge to remove the hinge cover plate and expose the hinge opening. I lifted off the glass oven door up and out and set it on my work bench. The door is heavy because its glass so make sure the doors on the way to the garage are open to your work bench area. I installed the cover
... Read moreplates back on so i would not loose the little covers and screws. I removed the screws all around the door and set them in a cup and lifted up the inner part of the door and the hinges are exposed. After removing the screws that hold on the hinges it lifted right out. I cleaned all the glass and set the new hinges in and locked them down with the screws and installed back the inner part of the door to the outer part and returned all the screws back. I then removed they screws on the hinge covers. I did not loose them with 4 kids running around and lifted the door back into the hinge openings and pushed down and it locked in. I then put a little pressure down on the door and removed the little locking pins. I pushed the door all the down and installed the hinge covers back on and it works beautiful. I think the new hinges are better than the set that came with the Jenn-Air wall oven. Thanks Parts Select. Also the new hinges came in 3 days as promised.
Read less
Bruno from Scottsdale, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken oven door hinge
I watched a You Tube video,removed and dismantled the door, installed the new hinge. I forgot to remove the small pin which is similar to a rivet. When I tried to close the door it bent. Eventually, I remembered the shipping pin and pulled it out with any damage. Believe it or not, I had read about the shipping pin on customer comment
... Read mores on PartsSelect...Good luck, it is relatively easy!
Read less
Stephen from Monmouth, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven light stays on when door is shut.
I replaced the hinges as described in other posts and the problem was solved. When the oven was 2 years old it had the same problem but the hinges should not have fatigued at that point. The engineering problem someone mentioned is that the pin of the light switch is too short. I touched it with lipstick, closed the oven door, and opened
... Read morethe door to see exactly where the door touched the pin. I drilled a small hole in the door and screwed in a self tapping metal screw...problem solved for 8 years until the hinges fatigued. After replacing the hinges I tried removing the screw but the light stayed on so I put the screw back.
Read less
ALAN from OSWEGO, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
10 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Arnold
December 15, 2021
Do these hinges fit this model?
For model number JJW8530CAW
Hello Arnold, thank you for writing. Yes, the part you had chosen is compatible. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kelly
December 3, 2022
How do you remove the temporary pin for the new hinge? Mine won’t budge
For model number WP74008014
Hi Kelly, thank you for reaching out. We have researched your model and attached a relevant video to help you. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ellis Pershay
September 4, 2019
Hi there just a question? I need an oven door hinge for my dual jenn air oven can you reccomend me the right part please.Thank you
For model number WW30430P
Hello Ellis, thank you for your question. The oven door hinge replacement for your unit is PartSelect Number: PS11744215. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
