BBB A-Plus
2085278-1-M-Whirlpool-74007734-Burner-Head-with-Electrode-Small.jpg
2085278-1-S-Whirlpool-74007734-Burner-Head-with-Electrode-Small.jpg 2085278-2-S-Whirlpool-74007734-Burner-Head-with-Electrode-Small.jpg

Burner Head with Electrode - Small

PartSelect Number PS2085278

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Gas igniter glows but will not light
  • Will not start
In Stock

  • Compare At

    $41.94

  • You Save

    $6.99

  • Your Price

    $34.95
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-3 of 3

 

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJoe from Saratoga Springs NY

Electrode would not lite burner

Unscrewed burner head and replaced with new burnerhead and electrode. Just like new. Parts cost 128.00 including shipping. Very simple repair. Saved 200.00 in labor. Parts came within 36 hours. Super Fast.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 10 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from South Lake Tahoe CA

Burner knobs melted, burned out electrode

R&R OLD knobs easy .R&R BURNER W/ ELECTRODE, UNSCREW LIFT OFF, UNPLUG SEECTRODE Reverse procedure easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Burner Head with Electrode - Small

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGlenn S from Edgewater FL

Electtrode

removed screws that hold burner in place lifted and removed wire connection, reversed attached wire replaced two screws job done,,,

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-3 of 3