Gas Oven Igniter - Vertical Mount

PartSelect Number PS2085070

This igniter assembly comes with its own metallic mounting bracket, and an eight inch long wire lead with a plastic plug.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Gas igniter glows, but will not light.
  • Little to no heat when baking.
  • Will Not Start.
  • Gas smell.
  • Little to no heat when broiling.
  • Oven not heating evenly.
  • Element will not heat.
  • Compare At

    $59.27
  • You Save

    $9.88
  • Your Price

    $49.39
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 81 reviews What's this?
26-30 of 81
 

1 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally Easy

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

CustomerJANIE from DETROIT, MI

Oven wouldn't heat

I first removed the screws inside the oven,let the tube that the flames come out of hang down,removed the screws from the igniter. Then I took the cover off the back of the stove and unplugged the old igniter and plugged in the new one. I put all screws back and put every thing back in place and the oven has been heating up every since. Thank you parts select. My husband is a otr trucker and won't be home until the 20th of this month. One less item on his "honey do list".

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerDianna from Granite Falls, WA

Oven slow to light

Simple... unscrew the 2 screws and unplug the electrical connection to uninstall and just the opposite to install.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerPatricia from Buffalo, NY

Oven wouldn't heat

I removed the oven racks, the bottom of the stove and a v-shaped cover that was over the heating element. The old gas ignitor screwed off easily after I put W-D 40 on the nuts. I un ooked the old gas igniter and replaced it with the new one. The oven lit immediately after I replaced everything. I am very proud of my self, I feel like a femal Bob Villa. I almost bought a new range. Boy am I happy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerThomas from Muskego, WI

Oven heated very slowly

Removed the drawer from under the stove then unscrewed the access panel in the back (two phillips head screws). Rather than take it off altogether I just swung it to one side.

The ignitor electrical connector required two hands to disconnect and it was a bit of a reach but came apart easily enough once I got hold of it.

Removed the racks and bottom from the oven. the bottom is held in by two pins in the back that you just slide toward the front then lift it out. I did not bother to remove the oven door, but some people might.

Then removed the two hex head screws holding the ignitor on and pulled the connector out of the hole leading to the bottom.

Installation is the reverse of removal The electrical connector was reluctant to back down the hole, but went with a little wiggling and pulling from underneath. Once you get it back down there the connector is keyed, so you can't get it wrong.

Piece of cake, really.

Total repair time: about 30 minutes, including the mandatory halfway beer break.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerHoracio from La Habra, CA

Ignitor went out

one screw holds the cover to the connector. one screw for the burner tube to the oven frame. two screws hold the ignitor bracket/assembly to the burner tube. that's it. take four screws off and disconnect. connect and put four screws back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

26-30 of 81