Gas Oven Igniter - Vertical Mount

PartSelect Number PS2085070

This gas oven igniter is a little over three inches long. It has a white ceramic base and a gray silicon carbide igniter. This igniter assembly comes with its own metallic mounting bracket, and an eight inch long wire lead with a plastic plug.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Gas igniter glows but will not light.
  • Little or no heat when baking.
  • Will not start.
  • Gas smell.
  • Oven not heating evenly.
  • Little or no heat when broiling.
  • Cooktop element not heating.
  • Compare At

    $68.26
  • You Save

    $11.38
  • Your Price

    $56.88
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 81 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

Customermary from gore springs MS

Stove would not preheat above 175

My stove would take forever to preheat and sometimes it wouldn't heat above 175. I order a new igniter, which was located under the drip pan . It took less then ten mins to replace and the stove is working like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench(Adjustable)

CustomerROBYN from ELIZABETH NJ

The oven would not come on.

We hired the neighborhood handy man, and he was able to repair the oven in about 15 minutes. I order the part and received it the next day. Excellent Service!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerWilliam from Forked River NJ

Smell of gas and would not always light or took forever to preheat

Remove the oven door by opening halfway and lifting door away from stove. Removed racks and bottom pan from oven area exposing the gas bar and vertical mount igniter. Next remove bottom storage door. With phillips screwdriver remove 2 screws securing rear cover plate in back of storage area, accessing the igniter connection, and unplug the plug. Next back in oven, remove 2 5/16 sheet metal screws securing igniter with a nut driver and remove igniter by getly pulling disconnected end thru to oven. Now reverse process, install new vertical mount igniter and push connection down thru to storage area, then reconnect wire connection and put cover plate back on.
At this piont I turned oven on and checked igniter, it glowed red right away and the oven lit right up. Put storage door, oven door, bottom oven panel, and racks back in and done. Took 15 minutes tops, and anyone can do this, super easy. My oven would sometimes take half hour to preheat to 350,if it even lit, now 5 minutes, and it lights every time. Save the cost of a repair man folks, this one can be done by any weekend warrior.
I would just like to note....if you are uncomfortable with disconnecting wire plugs and plugging them back in, just unplug the oven from the wall as well before changing out the part, just to be safe.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMark from Glencoe MO

Oven would not light

Replaced gas oven ignitor

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerEUGENE from ELKHORN WI

Oven would not light

CHANGED THE IGNITER

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerMichael from Corona CA

Wrong connector on new part.

seamed easy enough. Found the part and it looked identical, However I could not see the connector in the picture because the logo covered that part of the picture. Had to cut the connector off the old igniter and crimp it on to the new ingniter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customercrystal from Stonington ME

Gas oven igniter glowed but didn't lite

I removed the cover protecting the igniter. I pulled the stove away from the wall to get at the connect for the igniter. I loosened the 2 screws which held the igniter.
Took the new igniter ran the wire to the back to the connection and mounted the igniter with the 2 screws. Turned on the oven to make sure it works and it did. Turned off the oven, replace the cover and pushed the stove back in place. No big Deal!
Your web site was very helpful. Thank you so much!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerJames from Coosada AL

You couldn't use the oven because the gas igniter quit working

I was sure my problem was due to a gas ingiter that was no longer working. I read about others that had the same problem as I did. I ordered the part from Partselect because they had a 30 day no hassle parts return policy.
I removed the oven racks and 4 screws to get to the igniter.
I unpluged the igniter, put the new one in, and replaced the racks. Very simple and easy to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench set

CustomerDavid from Kingston MO

Oven would not light

First I tried oven ignitor. Did not cure the problem. Then ordered short sensor and it cured the problem. Pull range out & unplug unit.From inside unit remove two screws holding short sensor in &pull out from inside. Unhook sensor. Slide in new sensor& secure with two screws. Had to remove two screws on back of oven to plug in sensor to existing plug. Very simple job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerSheina from New York NY

Oven would turn on but not heat up

We ordered the replacement igniter and basically was very easy to replace. We ended up spending $50 for the part as opposed to spending $261.00 that Sears was going to charge.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerJohn from Montague NJ

Would not light

Removed the old igniter, followed the wires. Reversed the process and put it back together. Saved big bucks! Thanks for the quick service.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDee from Prescott WI

The oven would take up to 30 min to ignite once turned on

Once I got the new Igniter, I unplugged the old igniter and took two bolts out. Then remounted the new igniter and plugged it in. Works like a charm!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Wrench set

CustomerRobert from Georgiana AL

Oven gas valve and glow-bar burn out

THE REPAIRS WAS EASY,ONCE I FOUND THE PROBLEM I TURNED THE GAS OFF AND UNPLUG THE POWER SUPPLY CORD.FOR THE OVEN GAS VALVE I USED A 5/8 WRENCH TO TAKE THE GAS SUPPLY LINE AWAY FROM THE SIDE OF THE VALVE INSIDE THE OVER. I USED A 1/4 NUTDRIVER TO REMOVE THE TWO SCREW HOLDING THE BRAKET DOWN OVER THE VALVE. FOR THE GLOW-BAR I DONNECTED THE POWER SUPPLY PLUG AND USED A 1/4 NUTDRIVER TO REMOVE TWO SCREW HOLDING IT IN PLACE NEXT TO THE BRUN.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

Customerbrian from waukesha WI

My oven wouldn't always properly pre heat

It was real easy I took the wire racks out then the bottom cover. The ignitor was right there. The two screws took a little to get out for rust. i pulled the wire up and disconnected the old unit and connected the new one the put everything back together

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Gas Oven Igniter - Vertical Mount

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers, Wrench set, Wrench(Adjustable)

CustomerDavid from Osseo WI

Oven would't lite

followed instructions from repair manual.

Help other customers find the most helpful instructions.

Were these instructions helpful?