2084986-1-S-Whirlpool-74007399-Bake Igniter
2084986-1-S-Whirlpool-74007399-Bake Igniter 2084986-2-S-Whirlpool-74007399-Bake Igniter

Bake Igniter

PartSelect Number PS2084986

This part ignites to help bake your food.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Will Not Start.
  • Compare At

    $64.88
  • You Save

    $10.81
  • Your Price

    $54.07
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerStephen from Wolcott CT

Oven not heating up properly, taking way to long, not maintaining temperature, poor performance. (45 min to heat up to 350)

Change Temp Sensor-Turn off the power or unplug unit, remove oven racks, removed the two screws that hold temp sensor, pull out and unplug.
Change Igniter-Remove two front screws holding bottom cover on and lift out of place, next remove the two wing nuts holding square plate on, next remove the three screws holding gas tube in place, remove gas tube pulling wire carefully through and unplug it. Remove the two screws that hold igniter to gas tube. I found it easier to pull stove out and remove back bottom left square cover held in with four screws to fish the igniter cable back through.
Oven now heats to 350 in 8 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Bake Igniter

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerScott from Wakefiled RI

Stove would not light

repair was easy. remove the covers to get to the igniter. the connection is in the back of the range, requiring the removal of the back panel of the range, but it was easy once the range was pulled out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Bake Igniter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerTim from Monroe WA

Oven would not warm up

This was quick and painless. Just had to remove the cover at the bottom of the oven and remove the burner. Unhooked the wireA couple of screws held the igniter on the burner. Took those off and replaced it with the new one. Done deal. This took no more the 5 minutes to complete and it works like a charm!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3