Quick Question!

Have you ever purchased from PartSelect.com before?

2083515-1-S-Whirlpool-74005790-Red Indicator Light
2083515-1-S-Whirlpool-74005790-Red Indicator Light 2083515-2-S-Whirlpool-74005790-Red Indicator Light http://www.partselect.com/Schematics/Maytag/53275.gif

Red Indicator Light

PartSelect Number PS2083515

This indicator light illuminates, alerting you as to when the oven or stovetop is operating.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$10.38

You Save

$1.73

Your Price

$8.65
Order within the next 7 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Clip

Part Number 11743928

This clip is sold individually. It is used to clip down the indicator light on an oven or stovetop.

Order within the next 7 hrs and your part ships today!
$7.79
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 5 reviews What's this?
1-5 of 5
 

13 of 14 people found this instruction helpful

Parts Used:
  • Red Indicator Light
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: THOMAS from BOWIE, MD

Needed to replace indicator light after original had been broken when a pot fell and shattered the lens.

Removed the two screws holding the switch/indicator lights panel in place. After removing the two wires from the old indicator light, i removed the broken light, installed the new one, and reconnected the wires. It was then I discovered there was a spring clip that holds the indicator light in place, it had fallen into the area where the filter is kept. I had to remove the wires again, install the clip, reconnect the wires, and install the two screws holding the light panel in place. It would have been helpful to have a short description of the process included, which would have eliminated the need to remove the wires a second time to install the spring clip. The clip is essential to hold the indicator light in position and prevent it from moving.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Thomas from Moneta, VA

Fan switch and indicator lights disintegrated

Turned off the power. Removed the assembly with two screws then removed the switch with two screws. Pulled off the wires. Put on the new switch and lights and reconnected the wires. Reattached the assembly. Turned on the power. All OK.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Red Indicator Light
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Eva from Killeen, TX

One of our indicator lights came broken when we purchased the cooktop

We removed all the screws in order to remove the top cooktop frame. Once we did, the bottom part of the cooktop fell! It was being held up by the vent that goes underneath. My son and I had to get underneath to push up while my husband tried to position the cooktop back over the counter top ledge. It was VERY heavy. This was difficult and needless to say, it fell a couple more times before we finally were able to keep it on the ledge. We had to turn off the electricity, pulled the element out and disconnected the two wires, installed the new light and then placed the cooktop cover back in place by screwing all the screws. We did test the light before screwing on the cooktop cover JUST in case...:) It worked!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 15 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers, Wrench set
Customer: Thomas from Grant, NE

Surface burner switch failed, and so did red light indicator.

I disassembled the stove top and replaced the components.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Red Indicator Light
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers
Customer: Javad from Shingle Springs, CA

Fan switch burnt and red light indicator broken

The switch did not fit in and had to be returned.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5