4 of 5 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers
Customerpaul from brunswick OH
Convection fan motor was in-op.
after ordering the part over I received it in a few days. However when I removed it from the sealed box I found it to be damaged. One of the mounting brackets for the motor assy was bent and the blades were bent and rubbed on the mounting plate. I straightened the bracket with pliers and tried to bend the fan blades so they would not rub on the housing. After installing the part it worked but makes a lot of noise from the blades hitting the housing. It needs to be replaced with a new assy. Thank you, Paul Turek