Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2081927
This small black knob is used to turn on the igniter.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Actually too simply to list as diy job. Merely remove old knob and push new one onto spindle.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Slip old knob off slide new knob on, be sure to align knob properly your done
Purchased the new, removed the old (2 phillips screws) and installed the new igniter. I was able to salvage one of the old wires by pulling the broken post out of the slip fitting. I ordered 3 new wires (at a later date) just in case. I think the only trick part of this job is to properly install the ignition knob, this is more than important. if installed incorrectly a person could damage the new igniter.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.