2081468-1-S-Whirlpool-74003369-Control Panel End Cap - Right Side
2081468-1-S-Whirlpool-74003369-Control Panel End Cap - Right Side 2081468-2-S-Whirlpool-74003369-Control Panel End Cap - Right Side 2081468-3-S-Whirlpool-74003369-Control Panel End Cap - Right Side http://www.partselect.com/Schematics/Maytag/51352.gif

Control Panel End Cap - Right Side

PartSelect Number PS2081468

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $26.92
  • You Save

    $4.49
  • Your Price

    $22.43
Special Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Control Panel End Cap - Left Side

Part Number 2081469

This end cap is white in color and is located on the left hand side.

$22.33
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 3 reviews What's this?
1-3 of 3
 

66 of 130 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Shaveta from Sterling, VA

Electric range oven's element wouldn't heat up and dishwasher's upper rack wont roll out

The sketches on PartSelect.com were very-very helpful, in picking up the parts to order and also while fixing the parts.

For oven range. First I removed the two screws that hold the flat top in place and lifted the flat top. I then unscrewed the two screws that holds the element kit. Disconnected the three wires, and replaced the broken element with the new one. All done.

For dishwasher, just snapped the parts in and all set.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Richard from Davenport, FL

Broken control panel ends

slid out the range removed the old replaced it with the new. very easy repair

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: brian from waukesha, WI

My oven wouldn't always properly pre heat

It was real easy I took the wire racks out then the bottom cover. The ignitor was right there. The two screws took a little to get out for rust. i pulled the wire up and disconnected the old unit and connected the new one the put everything back together

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3