This is a thermostat knob, but you may know it as a surface burner knob. It is a part for the stovetop on your range. It gives you the ability to control the heat levels of the surface burner, located on the stovetop of the range. This knob is all black in color and accepts a D-shaped shaf.t It has a diameter of 2 inches.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Shelley C - July 1, 2020
Verified Purchase
Fits a range of models
GREAT! Our stove is 25 years old and this part saved us. Good product and service.
★★★★★
★★★★★
Michelle H - June 3, 2020
Verified Purchase
Perfect fit
For some reason, I had trouble finding the replacement oven thermostat knob for my Admiral stove. And then I found this website. I am a renter, and I can’t even tell you the model. I just knew my knob was broken, and the work around was pretty half assed. Even though I found this part a little pricey for what it is, it’s a perfect fit. I can now operate my oven properly again. So much safer.
★★★★★
★★★★★
Ralph N - August 29, 2019
Verified Purchase
Perfect match!
I never expected to replace my old knob with one side broken off. Quick, easy and inexpensive - thank you PartSelect.
★★★★★
★★★★★
Margaret O - May 13, 2019
Verified Purchase
Thermostat knob
Worked great
★★★★★
★★★★★
James R - May 7, 2019
Verified Purchase
My Magic Chef stove thermostat knob was a perfect fit
My magic chef thermostat knob came very fast!
★★★★★
★★★★★
Lawrence R - February 6, 2019
Verified Purchase
Perfect fit
The part was a perfect fit, now I can set my oven at the correct temperature instead of guessing..
★★★★★
★★★★★
Carolyn Y - January 12, 2019
Verified Purchase
Easy fix ..exactly what I needed..perfect
Easy , fast ,perfection ?
★★★★★
★★★★★
Mike E - November 9, 2018
Verified Purchase
Wrong part
The control knob is too small. What can I do now?
★★★★★
★★★★★
Omar H - October 4, 2018
Verified Purchase
So easy
The part was an exact fit. Arrived as expected and I took it out of the package and pushed it on the thermostat shaft. Done!
★★★★★
★★★★★
Mary B - September 26, 2018
Verified Purchase
Works fine. Nice to be able to read the temp again on oven knob.
Came fast works great
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 16 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven knob was broke
Got the new one and put it on
Sara from FORT RIPLEY, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
unable to see the numbers on the old knob.
ordered it had to line it up then just popped it on.
Patricia from SAN LEANDRO, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
gas range knob and oven knob for my magic chief stove broke
After going to Homedepot, Sears, Lowes and other hardware stores I reached out to some folks at my job i was recommended to order the parts from PartSelect. I spent the Christmas and New Years Holiday in a mess. I really could not cook like i wanted to. I ordered the parts within a week it came. I am thankful you to guys no more drama,
... Read more caos or worries. I highly recommend this site very easy to install. thank you
I purchased a knob that I was hoping might fit properly. Unfortunately I did not find anything that matched the knob we had originally. We use the knob that I purchased to turn the oven on and off, but the shaft channel is much longer than the shaft on the stove, so the knob sits high above the other knobs. I wish that I could find
... Read more a knob to accommodate the shaft on the stove. I have considered purchasing an addition kinob and trying to saw off part of the shaft if the plastic can be shortened without shattering.
Read less
Judy from ARDSLEY, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Thermostat Knob
After ordering 3 or 4 different knobs for replacement, I found the one I needed. I did not have the oven model number at first...now everything is working fine. No tools, just push the knob into place. Thanks!
Kathy from Fremont, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
New thermostat knob
I just pop on the new knob. It was easy. And I got fast service order my knob and it got here in 3 days. I am very happy with your part and service. Thanks Donna Eden
Donna from Flanagan, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Numbers on thermostat knob were worn off
I was tired of guessing the temperature on the oven in my apartment so I decided to look on-line to see if I could find a replacement. I couldn't find the exact Model Number to the old stove so I just took the old thermostat knob out and looked for pictures on the PartSelect site that matched up. I found one that was almost an exact mat
... Read morech so I decided to take a chance and order it. I was so happy when I received my replacement. It was a perfect fit. All I had to do was take the old knob out and put the new one in. Thanks PartSelect!
Read less
Wanda from New Rochelle, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Could not read the numbers on the thermostat knob
Made sure the knob was in the Off position. Removed the old knob by gently pulling it off. Lined up the knob and pushed it on.
Robert from Camp Hill, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
needed a new knob
pulled the old one off and push the new one on
Clayton from Shortsville, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Paint wears off buttons. need better TECA paint.
Matched up knob. 3D picture helps bunches
Kim from DeRuyter, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Terry L . Vinson
April 13, 2018
Just brought a thermostat knob from partselect part# ps11744003. Need the other 4 knobs don't have a part #. The stove is a Crosley it's 30yrs old please help.
For model number Don't know it.
Hello, thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the appliance. I was able to find this part that referenced some kind of relation to the thermostat knob. However, it may not work with your appliance. Since we do not have your model number there is no way to verify or guarantee this is the right part. The valve knob is part number WP7711P135-60. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Margaret
April 29, 2019
Would this work on a Magic Chef bought in 1990?
For model number U31fa-7
Hello Margaret, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11744003. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
November 26, 2021
What the part number for thermostat knob for this model number .
For model number 3110 PRW-U
Hello Michael, thank you for your question. The part you are requesting has been discontinued and we have no known replacement listed in our system. We have no further information. You are welcome to contact the manufacturer of the part to see if they have recently released a new substitute, and then you are always welcome to check back to see if we carry the part. This was the part number: 7731P083-60. We hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Judith
April 9, 2022
How long is the shaft on part # WP74002419? The Thermostat control knob for the oven on my range has a one inch shaft, 2 inch diameter knob D shaft. I can't find a plate any where on the range with a model number. It is a gas range probably from late 1970's or early 1970's. I would also like to replace the burner knobs for this stove as well. Any idea what the part # for those would be? Thanks in advance for any help.
For model number Magic Chef Uniburner
Hello Judith, Thank you for the question. The Shaft is approximately 1" Long and the knob is approximately 2" in diameter. In order for us to locate the correct parts and repair information we will require the model number of the unit. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps!
Was this helpful?
Thank you for voting!
Randel
May 5, 2022
How do I know if this will work with natural gas?
For model number C3100PAW
Hello Randel, Thank you for the question. The knob is used on both Natural and LP Gas. There are however two series of knobs for this model. To determine the series you need, we will need the serial number of the appliance. Please submit a new question if you have any follow ups. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Steven
October 8, 2021
Will this knob fit my model number. It has a long stem that fits over the thermostat
For model number U31EA-7
Hello Steven, thank you for writing. Yes, that knob is compatible with your model number U31EA-7. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
