See part 9 in the diagram


PartSelect Number PS2080278

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.3 / 5.0, 1 reviews What's this?
1-1 of 1

2 of 3 people found this instruction helpful

Parts Used


Level of DifficultyDifficult

Time to do repair:30 - 60 mins

ToolsScrew drivers, Wrench(Adjustable)

Customerjames from lynn MA

Burner not working no ignition

I first took off all the top pieces so I had access to the gas tubes I disconnected the front and rear gas tubes then removed the 6 screws holding down the bar the burners are attached to I then tipped the bar on its side sort of then using a bendable screw driver going in through the side I wasn't fixing I took out the 2 screws that hold the burner in place [ it took two people to take out the screws one to turn the screw driver and one to hold the bit in place in the screw ] you take off the burner than put on the new one just reverse the steps to reinstall. I will finish as soon as I find the little ceramic igniter piece I need

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1