Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cj
October 25, 2023
I will buy the igniter part but do not know how to access area in oven
For model number prg3610lp
Hello Cj, thank you for contacting us. We have found some relevant instructions to replace the igniter. These instructions may not be of the exact model but will help you with the process. Unplug the unit. Remove the screws securing the lower rear access panel. Remove the panel. Disconnect the igniter wire connector. Open the oven door and remove the racks. Lift the lower access panel up from the rear and slide it back to remove. Remove the screws securing the burner tube and pull the burner tube and igniter out of the oven. Remove the screws securing the igniter. Then remove the old igniter and install the new oven igniter by positioning it on the burner tube. Follow the same steps backward to reassemble the parts. We hope this information is useful!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
