Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2079053
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Sold individually. This part is located beneath the element and catches any spills.
This trim ring is used with many electric ranges. It is a chrome trim ring that is intended for use with eight inch surface burner elements.
This trim ring is intended for use with many electric ranges. It is a chrome trim ring that is used with six inch surface burner elements. Notes The matching eight inch chrome trim ring is available with part number PS120222.
This drip bowl is eight inches in diameter. It is made of black porcelain.
This black porcelain drip bowl is six inches in diameter and it has a vent hole.
All I did was take out the old drip bowls and broken element and put in the new. I have had a difficult time trying to find the parts, but PartSelect made it so easy and the parts were the correct ones for my old JennAir stove.
Help other customers find the most helpful instructions.
Were these instructions helpful?
This was so easy. I've looked for years in stores for these pans. I finally tried the Internet, found PartSelects and, holding my breath at what i'd find, voila'...perfect fit, perfect replacements. And it took just a couple days to arrive. I'll definately be back! /John
Did not need tools for this job. Simply lift burner element and remove old drip pan and put new one in its place. However - the drip pans that were shipped only fit on the left side of the range. The right side, where the grill attachment goes, is so shallow that the drip pans on that side hit the bottom plate beneath the burner element and would not let the element go down far enough to seat properly. I kept the two pans that don't fit for extras, but I still need shallower pans to fit on the right side.
We purchased our home this year. We were thinking we'd have to replace our JennAir counter-top cook stove. We priced some new stoves. The realization hit us that we'd be spending around $1,200 to $1,800 to replace this stove.After visiting Partselect.com, it became obvious, we could just as easily replace those items which were broken or damaged and we'd have in essence, a new counter-top stove.When the parts came in, I basically took everything out of the existing counter-top stove and replaced it. The top porcelain counter-top had 8 screws. I was able to remove those and then worked carefully to put the new one on.Now that we've got all the parts on/in, my wife is very happy and states that we should be good to go for another 10 years. That saved us quite a bit of money! Did I mention, I'm legally blind? And I was able to put all of these parts on, with little effort. I just had to be patient and remember where things went. I do a LOT of feeling around to find things. The way JennAir built their countertop stove, I was very fortunate.Thanks to Parts Select and JennAir, we are now up and fully operational!
Replaced the drip pans
Took out the old element, ring and drip and replaced with new.
Pulled out the old burner and plugged in the new!
I removed the old heating element, then the drip pan and then the adaptor ring. I cleaned the residue and buildup that was under the ring and on the surface below, I then snapped in to place the adaptor ring and then oriented and placed the drip bowl in place and finally oriented and pushed the heater element leads into their socket.I turned the heating dial on and immediately felt the element warming up.Checked Low temp and then Hi temp. Everything is working and looking fine. The wife wants to replace the other ones, she says that it's easier than cleaning them.
The repairs were very simple we just disconnected one screw then removed the old one and replace with new one. The left side took a little longer, because of the 8 screws we needed to remove to take the back panel off. But once we had it taken off the replacement was a snap. Nothing to it.
No brain surgery required. Removed electric burner, put in new drip pans. Voila! Good for many more years of service looking like new.
I installed a new infinite switch, which created a new problem. The large burner switch turned the small burner on. I replaced the large burner switch an that stopped that problem. But now the small burner still only comes on to high temp. Need help in determining how to correct that problem.I had already replaced the small burner switch before I replaced the large burner switch and I still have the small burner only coming onn to high heat.
replaced drip pans--they fit perfectly and look great!
Our old Jenn-air cooktop was at least 28 years old.They looked bad.We didn't see the need to buy a whole cooktop when the rest of the stove, fan,etc. still worked great. So I got on the Partselect web site and found a black radiant cartridge. It came exactly the day the said it would. I took out the old coil cartridge and plugged the new one. Lo, my stove now looks modern. We also ordered a terminal block. With this my husband repaired the old burned out coil burner and in about 20 minutes I had a spare to use with my canner. I really like the new cartridge and plan to buy another one. It was a pleasure to do business with Partselect.
Just remove the old ones and replace them with the new ones. no tools necessary.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.