Drip Bowl - 8"

PartSelect Number PS2079053

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Touchpad does not respond.
  • Compare At

    $12.06
  • You Save

    $2.01
  • Your Price

    $10.05
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drip Bowl - 6"

Part Number 1854703

Sold individually.

$9.55
In Stock

Ring Adaptor - 8"

Part Number 2201798

This chrome trim ring is intended for use with eight inch surface burner elements.

$25.59
In Stock

Drip Bowl - 8"

Part Number 2080398

$10.64
In Stock

Porcelain Drip Bowl - 6"

Part Number 2091730

$18.32
In Stock

Trim Ring - 6"

Part Number 2201799

$22.57
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 35 reviews What's this?
 

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerVeronica from East Sandwich MA

Burner not wrking well and did not fit well anymore. The whole burner was slippig when cooking withit.

Took out the old element, ring and drip and replaced with new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Portsmouth NH

Adaptor ring and drip bowl corroded over the years and the heating element was acting up.

I removed the old heating element, then the drip pan and then the adaptor ring. I cleaned the residue and buildup that was under the ring and on the surface below, I then snapped in to place the adaptor ring and then oriented and placed the drip bowl in place and finally oriented and pushed the heater element leads into their socket.

I turned the heating dial on and immediately felt the element warming up.

Checked Low temp and then Hi temp.
Everything is working and looking fine. The wife wants to replace the other ones, she says that it's easier than cleaning them.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJOANNE from MONKEY ISLAND OK

Drip pans were in need of replacement

No brain surgery required. Removed electric burner, put in new drip pans. Voila! Good for many more years of service looking like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerJeffrey from Clearwater FL

Burner would n.Ot het hot

We unscrewed the top plate, unscrewed the top of the switch removed the ballast underneath and it worked. I was so glad to be able to still get the parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerJudy from Florence AL

I needed a new top for my jenair

i just ordered the part and replaced it with stainless steel. i am so glad the saleslady told me about it. my stove looks brand new. my drip pans look so nice with my new cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerGordon from Annapolis CA

Worn out parts

Everyone was amazed we could still get parts for our 25 year old Jenn-air stove top. Easy installation, hands only, couldn't be happier with the easy of ordering, the fast shippment, the quick replacement. Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerTerrence from Troutdale OR

Replace broken parts/update existing countertop stove

We purchased our home this year. We were thinking we'd have to replace our JennAir counter-top cook stove. We priced some new stoves. The realization hit us that we'd be spending around $1,200 to $1,800 to replace this stove.

After visiting Partselect.com, it became obvious, we could just as easily replace those items which were broken or damaged and we'd have in essence, a new counter-top stove.

When the parts came in, I basically took everything out of the existing counter-top stove and replaced it. The top porcelain counter-top had 8 screws. I was able to remove those and then worked carefully to put the new one on.

Now that we've got all the parts on/in, my wife is very happy and states that we should be good to go for another 10 years. That saved us quite a bit of money!

Did I mention, I'm legally blind? And I was able to put all of these parts on, with little effort. I just had to be patient and remember where things went. I do a LOT of feeling around to find things. The way JennAir built their countertop stove, I was very fortunate.

Thanks to Parts Select and JennAir, we are now up and fully operational!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCarolyn from RR1 Box 1243 MO

Needed new drip bowls

just installed

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCynthia from Columbia PA

Replacement parts

very easy to find parts needed and shipped next day. will use this site again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJulie from Bloomfield Hills MI

Burned drip pans

replaced drip pans--they fit perfectly and look great!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drip Bowl - 8"

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKenneth L. from Rush KY

Old coil burners with one burned out

Our old Jenn-air cooktop was at least 28 years old.They looked bad.We didn't see the need to buy a whole cooktop when the rest of the stove, fan,etc. still worked great. So I got on the Partselect web site and found a black radiant cartridge. It came exactly the day the said it would. I took out the old coil cartridge and plugged the new one. Lo, my stove now looks modern. We also ordered a terminal block. With this my husband repaired the old burned out coil burner and in about 20 minutes I had a spare to use with my canner. I really like the new cartridge and plan to buy another one. It was a pleasure to do business with Partselect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMichelle from College Station TX

Easy as pie

Just remove the old ones and replace them with the new ones. no tools necessary.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerMichael from Walpole NH

Rusty existing parts

Unplugged the burner units and replaced the drip pans. Five seconds time per burner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerEsther from Alexandria VA

Burned out burner

Pulled out the old burner and plugged in the new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

CustomerDennis from Bacliff TX

Screws holding recepticles in place had to be drilled out.

Removed screws by drilling one and using a pliers to remove 2nd one. At first did not have enough wire to pull recepticles out until I relized wires were clipped to back of range to hold in place. Unclipped wires, pulled recepticles out, cut wires and attached new recepticles by connecting wires with wire nuts (I think wire nuts were to small so I used my own a size larger). Another problem that I found was that the recepticles on my range were held in place only by the screws that attached the recepticles to the drip pan flang. I had to bend an L bracket to prop under each recepticle to hold the back of it up so the burner element would sit level over the drip pan.

Help other customers find the most helpful instructions.

Were these instructions helpful?