Motor Isolator

PartSelect Number PS2078586

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $4.75
  • You Save

    $.79
  • Your Price

    $3.96
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.5 / 5.0, 4 reviews What's this?
1-4 of 4
 

363 of 366 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers

CustomerJohn from Berkley MI

Blower motor died and I needed to replace it

Most of the repair was obvious as I took the blower apart before ordering the parts. Unfortunately the new motor was significantly larger than the original motor so I had to um. Adjust the position of some of the other parts to fit it in. There was a sheet metal flange that was installed on the other side of the blower from the motor which was designed to focus the air flow into the blower. I used a hammer to ajust the angle of flange so it no longer extended as far into the blower housing.

It works just fine although its a bit louder than the old motor was.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 14 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers, Socket set

CustomerLawrence from Chandler TX

High blower vibration

blower wheel was caked with dried grease clumps; replaced blower wheel, urethan foam and 3 motor isolators; blower/fan no longer vibrating cooktop.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyDifficult

Time to do repair:More than 2 hours

ToolsNutdriver, Screw drivers, Socket set, Wrench set

CustomerMICHAEL from LAKE GROVE NY

Downdraft motor bearings shot

I FIRST HAD TO PURCHASE THE REPLACEMENT MOTOR WHICH WAS QUOTED FROM A HIGH OF $236 TO A LOW AT GRAINGERS OF$100.00. tHE COUNTERMAN AT GRAINGERS REMOVED THE BLOWER FAN FROM THE MOTOR FOR ME WITH A SPECIAL LONG HANDLED ALLEN KEY. i THEN DEGREASED AND CLEANED THE BLOWER FAN. i HAD TO CUT OFF THE SCREWS ON THE MOTOR AND REPLACE THE 3 MOTOR ISOLATORS AND THE URETHANE FOAM AROUND THE MOTOR. I HAD TO THREAD THE 3 WIRES FROM THE NEW MOTOR THROUGH THE BX CABLE FROM THE OLD MOTOR AND REATTACH THE FAN TO THE MOTOR. ANYONE WANTING MORE DETAILED INFORMATIOIN MAY CONTACT ME AT:mablume@optonline.net

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Motor Isolator

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Socket set, Wrench set

Customeralphonso from plainfield IL

Blower motor was making loud noise

removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4