15 of 24 people found this instruction helpful
- Radiant Surface Element with Limiter - 6" - 1200W
Level of DifficultyReally Easy
Time to do repair:Less than 15 mins
CustomerJohnny from Henderson, NC
6" burner on the radiant surface started smoking and burned out.
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit. Place new unit in between the three guides. Make sure the other unit is aligned also. Place glass top back unto unit and replace the 7 screws. Put unit back into stove top and test. Finished in less than 15 minutes with no issues.