11 of 11 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers, Socket set
CustomerJohn from Fraser MI
The led clock assembly went dark!
Turn off the power! Removed 4 phillip headed screws from beneath panel, (not the smaller phillip head screws at the each end). Gently tilted out the control panel, disconnected the wire harnesses, removed hex screws attaching clock assy to switch membrane. Cleaned a few items before re-assembly. put everything back together... You'll be surprised how bright the new assembly is...the old one gradually dimmed to the point it couldn't be read.
5 of 11 people found this instruction helpful
Level of DifficultyVery Difficult
Time to do repair:More than 2 hours
ToolsNutdriver, Pliers, Screw drivers, Socket set
CustomerJOSEPH from BALTIMORE MD
Fried circuit board
Disassembled the entire top of the range. Replaced the clock board. Problem remained. Replaced the touch pad. Now I had a new problem. The vent fan didn't work and the oven light wouldn't go out. .