| |
0 of 1 people found this instruction helpful
Parts Used
-
- Double Oven Electronic Clock
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers, Socket set
CustomerMark from North Richland Hills TX
Clock had gone dim over time
Removed screws holding in control panel. Replaced clock assembly following instructions listed by others. Easy. Wife happy.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Double Oven Electronic Clock
Level of DifficultyEasy
Time to do repair:30 - 60 mins
Tools
CustomerElizabeth from Aitkin MN
Control panel lights extremely dim
Removed upper cabinet doors. TURN OFF CIRCUIT BREAKER. Removed 4 screws holding control panel cover. Slid cover up and off. Disconnected 3 sets of wires. Removed old clock assembly, and replaced with new. Hooked up 3 sets of wires. Slid cover back on, attached screws.
Flipped circuit breaker - it worked!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Double Oven Electronic Clock
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDavid from Mount Arlington NJ
Lost timmer light
Unscrew 7 screws on foace plate,unplug computer board,replace with new board,rescrew 7 screws ,finished
|
0 of 1 people found this instruction helpful
Parts Used
-
- Double Oven Electronic Clock
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerBoguslaw from Orange CA
Display became progressively dim, barely visible
Thanks for the hint from this forum.
My display became very dimm, eventually unreadable.
WIth suggestion from this forum, I replaced the Electronic Clock assembly. I took me about 15 minutes. The display works perfectly fine and makes the oven look like new with its nice bright digits.
BJ
|
0 of 1 people found this instruction helpful
Parts Used
-
- Double Oven Electronic Clock
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerHeather from Bloomington IL
Display was out
Removed the screws pulled the control panel out and plugged in the new one......it was easy. It was 2 days before Thanksgiving, we were so happy to get it fixed.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Double Oven Electronic Clock
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerNANCY from RIDGEFIELD CT
Oven clock and temp light wouldn't illuminate
Easy repair- read the other reviews and followed it. Pretty straight forward.
Quick delivery on the part.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Double Oven Electronic Clock
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerCHRIS from MOSES LAKE WA
Digital readout was faded and unreadible
Removed three screws from top of display/control panel. Open upper oven door and remove 4 screws from botton of display/control panel. Pulled panel off and rested it face down on top rack of I pulled out of upper oven. removed 2 wiring harnesses and ribbon wiring form clock assembly. Remove four screws with nutdriver and remove clock assembly. Replace clock assembly and reasseble in reverse order from above.
|