Temperature Probe

PartSelect Number PS2077425

This temperature probe consists of two ends joined together by an insulated wire. The small end, the jack, plugs into the range, while the longer end, the probe, is inserted into the meat.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $62.95
  • You Save

    $10.49
  • Your Price

    $52.46
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 2 reviews What's this?
1-2 of 2
 

6 of 8 people found this instruction helpful

Parts Used

  • Temperature Probe

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerNicholas W J from Worthington OH

Temperature probe insulation broken down so short circuit

As the probe is a plug-in item that would normally be out of the oven, there was nothing more to the repair than checking that the new probe plug fitted the socket and that it was detected by the oven. Then the old probe was consigned to the trash.

Everything checked out, and the probe was used satisfactorily within a couple of days.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerBob from san jose CA

Display burned out

Very simple. A few screws removed, disconnected a few wires, reattached the wires, put back the screws all without a single cuss word

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2